Tetrosyl White Primer - 500ml

This primer is suitable for many automotive refinishing surfaces, including rigid plastics, wheels, and wheel trims. It is also compatible with cellulose finish paints.

The Tetrosyl ATS011 Trade Spray Paint White Primer is specially formulated for fast drying, allowing for quicker application of subsequent paint layers.

The product is specified for 'rigid plastics'. For flexible plastics, it is advisable to test adhesion in an inconspicuous area or use a primer specifically designed for flexible substrates.

The primer features an adjustable spray nozzle that, combined with proper application technique (correct distance, speed, and thin coats), helps achieve a finish comparable to that of a spray gun.

After use, invert the can and spray for a few seconds to clear the nozzle. This prevents the nozzle from becoming blocked for future use.

It is specifically mentioned as compatible with cellulose finish paints. For other topcoats, testing on a small, hidden area is recommended to ensure compatibility.

Store the can in a cool, dry place, away from direct sunlight and sources of heat or ignition. Ensure it is stored upright.

Ensure the can is shaken thoroughly before and during use. Check that the nozzle is not clogged; if necessary, clean it according to the care instructions. Hold the can at the recommended distance (approx. 15-25cm).

Verify that the surface was properly prepared, cleaned, and dried before application. Ensure no contaminants like oil or wax were present. Check compatibility with the substrate material, especially for plastics.

Apply the primer in thin, even coats rather than one thick coat. Maintain a consistent distance from the surface and use a steady sweeping motion. Reduce spray pressure or distance if applying too heavily.

Ensure the nozzle is clear. Shake the can vigorously again. If the problem persists, try clearing the nozzle with a pin or solvent as per instructions, ensuring safety precautions are taken.