Tilting TV Wall Mount - 23 inch to 42 inch - Black - PROSIGNAL
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The PROSIGNAL Tilting TV Wall Mount is designed for homeowners and office users seeking a secure, low-profile mounting solution for flat-panel televisions ranging from 23 to 42 inches. Its primary benefit is the combination of a slim 50mm wall clearance with adjustable tilt functionality, which helps reduce glare and improve line-of-sight from varied seating positions. A key caveat to note is that while it supports up to 35kg, users must ensure their specific wall construction can support the total weight of the mount and television combined.
All features
| Colour | Black |
|---|---|
| Model Part Number | PS-FWT2342B |
| Brand | PROSIGNAL |
Extended Product Information
FAQs
Does this mount fit a 50-inch TV?
No, this mount is specifically designed for screens between 23 and 42 inches. Attempting to use a larger screen may exceed weight limits or physical dimensions.
What is the maximum weight this mount can handle?
The mount is rated for a maximum load capacity of 35kg.
Can I mount this on a brick wall?
Yes, provided you use the appropriate heavy-duty masonry anchors suitable for brick, as the standard screws provided are generally for wooden studs.
Does the mount swivel left and right?
No, this is a tilting mount, not a full-motion mount. It only provides upward and downward tilt adjustments.
What does VESA mean?
VESA refers to the standard spacing of the four mounting holes on the back of your television, measured in millimeters.
How far does the TV sit from the wall?
The mount holds the television 50mm away from the wall surface.
Troubleshooting
The television is not centered after installation
Loosen the locking screws slightly and use the lateral shift brackets to slide the screen horizontally until it is perfectly aligned.
The screen does not hold the desired tilt angle
Ensure the tension knobs or screws on the side of the tilt mechanism are tightened firmly once the preferred angle is set.
Mounting hardware does not fit the TV
Verify that your TV's VESA pattern matches the supported dimensions and that you are using the correct bolt size provided in the installation kit.
Pros and Cons
Pros
- Extremely low-profile design sits close to the wall
- Easy adjustment of viewing angle with integrated tilt
- Quick and forgiving installation due to lateral shift brackets
- Supports a wide variety of VESA configurations
Cons
- Not suitable for screens larger than 42 inches
- Limited tilt range compared to full-motion mounts
- Requires sturdy mounting surface to safely support 35kg load
Setup, Compatibility & Care
To ensure a successful installation, confirm that your television's VESA pattern matches one of the supported sizes (75x75, 100x100, 200x100, or 200x200) and that the screen weight is under 35kg. Always use a stud finder to locate solid wooden studs if mounting on drywall, or use appropriate masonry anchors for concrete surfaces. After installation, periodically check the locking screws to ensure they remain tight, especially if you adjust the tilt frequently. Clean the mount periodically using a soft, dry cloth; avoid abrasive cleaners that could damage the black powder-coat finish.