Castle Quickcem Fast-Setting Cement - 25kg

Castle Quickcem is a high-performance fast-setting Portland cement designed for rapid repairs in a...

Best current price£26.69from B&Q

One Offer

1 offer from £26.69

View price history by clicking the chart icon.

B&QB&Q - Quickcem Fast-Setting Cement Rapid Repair For Holes In Floor Wall Patio Steps Drain Setting Posts Grouting Bolts Diy
Free delivery in 1–3 days
£26.69
Visit shop

Product Information

Full details

Castle Quickcem is designed for homeowners and contractors who need to complete urgent concrete repairs with minimal downtime. Its primary benefit is a rapid-setting formula that allows for fast structural restoration, making it ideal for patching floors, walls, and patios or setting fence posts. Users should note that because of its quick curing time, it requires efficient application, as the mixture will harden significantly faster than standard Portland cement products.

All features

Model Part Number506615
BrandCastle

Extended Product Information

FAQs

Can I use this for large concrete slabs?

No, it is formulated for fast-setting repairs and would harden too quickly to allow for proper leveling and finishing of a large slab.

How long does it take to fully cure?

While it sets very rapidly, it is best to allow 24 hours for it to reach its full structural strength before applying heavy loads.

Is this waterproof?

While it is durable and suitable for outdoor use, it is not a waterproofing membrane; consider a sealant if the area needs to be watertight.

Do I need to add sand or aggregate?

Castle Quickcem is designed to be used as specified; check the packaging instructions to see if specific mixing ratios are required for your application.

Can I apply this in freezing temperatures?

It is generally not recommended to apply cement in freezing temperatures as the water can freeze before the hydration process is complete.

Troubleshooting

The mixture hardened too quickly before application.

Reduce batch size and work faster; do not try to re-temper the cement with extra water once it begins to set.

The patch is crumbling after drying.

Ensure the substrate was free of dust and debris, and verify that the water-to-cement ratio was correct during mixing.

The product in the bag has turned into hard lumps.

This indicates moisture exposure; the bag should be stored in a completely dry area. Hardened material cannot be used.

Pros and Cons

Pros

  • Drastically reduces project wait times with fast-setting properties
  • Versatile enough for both indoor and outdoor repairs
  • High-performance bond strength suitable for structural tasks like post setting
  • Reliable, high-quality Portland cement composition

Cons

  • Limited working time requires quick and precise application
  • Not suitable for large-scale slab pouring where extended work time is needed
  • Requires careful water-to-powder ratio for optimal results
  • Heavy 25kg bag may be difficult to maneuver for some users

Setup, Compatibility & Care

To ensure proper performance, always use a clean mixing vessel and start with a minimal amount of water, gradually adding more until you reach a workable, thick paste consistency. For best results, clean the surface of the area being repaired by removing loose debris, dust, or oil, as these can compromise the bond. Always wear appropriate safety gear, including gloves and eye protection, as cement is caustic. Store the 25kg bag in a dry, moisture-free environment, as exposure to humidity will cause the product to clump and harden in the packaging, rendering it ineffective.

Price History

DatePrice
Visit shop