SRAM QuickView MTB Garmin GPS Mount - 31.8mm
Best current price£16.99from Tredz
Best offers
Shopping.co.uk recommended and popular offers
Tredz£16.99Visit shop Sram Quickview Mtb Garmin Gps/Computer Mount Size 1
Visit shopTredz£16.99Visit shop All Offers
6 offers from £16.99 - £30.34
View price history by clicking the chart icon.
Evans Cycles UKSram Quickview Mtb Garmin Gps Mount 31.8Mm Twist Lock Medium White
£4.99 delivery
£22.00
Visit shop
Leisure Lakes BikesSram Quickview MTB Garmin Mount Black
Free delivery in 1–3 days
£22.00
Visit shop
Sram Quickview MTB Garmin Mount BlackFree delivery in 1–3 days£22.00Visit shop →
OnBuy.comSram Quickview Mtb Garmin Gps / Computer Mount 31.8 Mm Quarter Turn / Twist Lock
Free delivery in 1–3 days
£27.90
Visit shop
eBaySRAM QuickView MTB Computer Mount Quarter Turn w/ Garmin 205/305/605/705 Adapter
£3.60 delivery
£30.34
Visit shop
Product Information
Full details
The SRAM QuickView MTB Garmin GPS Mount is designed for dedicated mountain bikers who need a secure, impact-resistant way to display their ride data while navigating technical terrain. By positioning your cycling computer directly behind the stem face plate, this mount offers superior protection from trail hazards compared to standard road-focused mounts; however, it is strictly limited to 31.8mm handlebar diameters and requires a T25 wrench for installation.
All features
| Material | Nylon |
|---|---|
| Model Part Number | SMCM029001 |
| Brand | SRAM |
Extended Product Information
FAQs
Is this mount compatible with handlebars other than 31.8mm?
No, this mount is specifically engineered for a 31.8mm clamping diameter and will not fit 35mm or 25.4mm bars.
Does this mount work with non-Garmin devices?
The mount uses the standard 1/4 turn interface compatible with Garmin devices; other brands using this same mounting standard may fit, but it is optimized specifically for Garmin.
Can I use this mount on a road bike?
While it will technically fit a 31.8mm road handlebar, the mount is designed for MTB-specific geometry and may sit lower or further back than road-specific mounts.
What tools do I need for installation?
You will need a T25 Torx wrench.
Is the material durable enough for cold weather?
Yes, the high-quality nylon construction is designed to maintain structural integrity across a wide range of temperatures.
Troubleshooting
Computer feels loose or rattles in the mount
Clean the 1/4 turn interface on both the mount and the back of your computer. If the rattle persists, check if the mounting tabs on your computer are worn down.
Mount rotates on the handlebar under pressure
Ensure the handlebar surface is clean and free of grease. If slipping occurs, apply a small amount of carbon paste or check that the clamp is tightened securely to the recommended torque.
Pros and Cons
Pros
- Durable construction specifically rated for mountain biking
- Excellent device protection due to recessed positioning
- Easy installation with top-access hardware
- Secure locking interface prevents device ejection on rough trails
Cons
- Limited to 31.8mm handlebar diameters only
- Requires a T25 wrench which is not always on basic multi-tools
- Fixed position may not fit bikes with extremely short or integrated stems
Setup, Compatibility & Care
To install, loosen the T25 pinch bolt until the split-clamp is wide enough to wrap around your 31.8mm handlebar. Position the mount so the Garmin cradle is centered or slightly offset to your preference, then tighten the T25 bolt until secure. Do not over-tighten, as the nylon construction provides enough grip with moderate torque. For maintenance, periodically check the T25 bolt for tightness after extreme ride cycles. To clean, use a damp cloth to wipe away mud from the 1/4 turn interface, ensuring the locking detents remain free of grit so the computer clicks in smoothly.