Morris Multivis Eco T 0W-8 Fully Synthetic Engine Oil 1L

This oil is specifically recommended for modern hybrid vehicles and high-output small petrol engines that require a 0W-8 viscosity grade and meet JASO GLV-1, ILSAC GF-5, or API SN performance levels. Always consult your vehicle's owner's manual for specific requirements.

This 0W-8 oil is a very low viscosity lubricant designed for modern engines. It is generally not recommended for older vehicles that specify a thicker oil grade (e.g., 5W-30, 10W-40) as it may not provide adequate protection. Always refer to your vehicle's handbook.

The 0W-8 viscosity allows for extremely rapid oil circulation from cold, reducing engine wear during startup. It also contributes to lower friction, leading to improved fuel efficiency and reduced CO₂ emissions compared to thicker oils.

The 0W-8 viscosity reduces internal engine friction, leading to better fuel economy. Additionally, its low volatility minimizes oil evaporation, which in turn reduces harmful exhaust emissions. It's also compatible with gasoline particulate filters.

0W-8 is a thinner oil than 0W-20 at operating temperature. This lower viscosity is specifically engineered for the latest generation of engines, including hybrids, to maximize fuel efficiency and minimize wear in very specific operating conditions. 0W-20 is suitable for a wider range of modern gasoline engines but may not offer the same peak efficiency benefits as 0W-8 where specified.

Yes, the rapid circulation from cold ensures that critical components like bearings and valve gear are protected even during the frequent starts and stops characteristic of hybrid vehicle usage.

API SN and ILSAC GF-5 are performance standards for engine oils. API SN represents a certain level of protection for gasoline engines, while ILSAC GF-5 focuses on fuel economy benefits and engine protection for current gasoline-powered vehicles. JASO GLV-1 is a specific standard for low-viscosity gasoline engine oils often used in hybrid vehicles.

Check the oil level immediately. If low, top up with the correct grade of oil. If the level is correct, there may be an issue with the oil pressure sensor or pump; consult a qualified mechanic.

Ensure the correct oil viscosity (0W-8) and specification are being used. A low oil level or old oil can also cause increased noise. Check the oil level and condition, and consider an oil change if necessary.

While oil plays a role in engine cooling, overheating is often due to other systems. However, ensure the oil level is correct and the oil is not excessively degraded, as this can reduce its cooling efficiency. Check coolant levels and the cooling system's overall function.