Best current price£13.75from B&Q
Shopping.co.uk recommended and popular offers
B&Q£13.75Visit shop B&Q - Assorted Punched 1/3 Sanding Sheet Set (L)230mm (W)93mmPack Of 10
Visit shop1 offer from £13.75
View price history by clicking the chart icon.
This pack of 10 assorted grit 1/3 sanding sheets is designed for DIY enthusiasts and professionals needing a versatile solution for various material preparation tasks. The key benefit is the durable aluminum oxide construction and assorted grits, providing effective stripping, sanding, and finishing. A potential caveat is that they are designed for clamp-style sanders only, limiting compatibility with other attachment types.
| Brand | Universal Fit |
|---|
Assorted grit means the pack contains sanding sheets with different levels of coarseness, typically including coarser grits for rapid material removal and finer grits for smoothing and finishing.
No, these sheets are specifically designed for 1/3 sheet orbital sanders that use a clamp attachment system for securing the sandpaper.
Use coarser grits (e.g., 60-80) for removing material quickly (stripping paint, shaping wood). Use medium grits (e.g., 100-150) for general sanding and smoothing. Use finer grits (e.g., 180-220) for finishing surfaces before painting or staining.
These sheets are designed for dry sanding. Using them with water or liquids may damage the abrasive material and reduce their effectiveness.
The lifespan of a sanding sheet depends on the material being sanded, the pressure applied, and the grit. Once the abrasive wears down or the sheet becomes clogged with dust, it should be replaced for optimal performance.
The punched holes align with dust collection ports on compatible sanders, allowing dust and debris to be vacuumed away from the sanding surface and the work area, resulting in a cleaner finish and healthier environment.
These sheets are pre-cut to 1/3 size. Attempting to cut them may interfere with the clamp mechanism or dust extraction holes, potentially leading to poor performance or damage to the sheet.
Ensure the clamp mechanisms on your sander are properly tightened and holding the sheet securely. Check for any debris that might be preventing a firm grip. Make sure the sheet is positioned correctly and is not bunched or creased.
The abrasive grit may be worn out or the sheet may be clogged with dust and debris. Replace the sanding sheet with a new one. Ensure you are using the appropriate grit for the material and task.
Verify that the punched holes on the sanding sheet are properly aligned with the dust extraction ports on your sander. Ensure your dust extraction system (e.g., vacuum cleaner) is properly connected and functioning. If dust is still excessive, consider using a mask and working in a well-ventilated area.
This can happen if the sheet is not properly secured, if excessive pressure is applied, or if the material being sanded is very hard. Ensure clamps are tight and adjust your pressure. Try a coarser grit if you are encountering too much resistance.
Setup:
Compatibility:
These sheets are designed for 1/3 sheet orbital sanders that feature a clamp-style paper attachment. They are *not* compatible with hook-and-loop (velcro) sanding pads or other sander sizes.
Care:
Sanding sheets are consumable and designed for single-use or limited multi-use depending on the material and intensity of sanding. Once a sheet becomes loaded with dust or its abrasive grit is worn down, it should be replaced. Do not attempt to clean or reuse worn-out sheets, as this will lead to poor performance and potential damage to the workpiece.
