Water Meter Fitting - 3/4 Inch Union Nut x 1/2 Inch Male Thread
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Tecuro Water Meter Fitting set is designed for plumbers and DIY enthusiasts needing to connect standard water meters with different thread sizes. Its key benefit is enabling a secure transition from a 3/4 inch union nut to a 1/2 inch male thread. A potential caveat is the need to verify exact thread compatibility and to ensure proper sealing for leak-free operation.
All features
| Model Part Number | 49600 |
|---|---|
| Brand | tecuro |
Extended Product Information
FAQs
What material is the Tecuro Water Meter Fitting made of?
The fitting is made of durable brass.
What are the thread sizes for this fitting?
It connects a 3/4 inch union nut to a 1/2 inch male thread.
Does this fitting come with seals?
Yes, the fitting includes seals necessary for a watertight connection.
How many pieces are in one set?
One set contains 2 pieces.
Can I use this fitting for any water meter?
This fitting is specifically designed for water meters with a 3/4 inch union nut connection and pipework with a 1/2 inch male thread. Always verify compatibility with your specific setup.
What is DN 15?
DN 15 refers to the nominal diameter of the fitting, which is approximately 1/2 inch.
Where can I find the thread conversion chart?
The thread conversion chart is provided within the product images.
Troubleshooting
Leak at connection point
Ensure seals are correctly seated and undamaged. Tighten the union nut further, but avoid overtightening. Verify that the thread sizes are correctly matched for the application.
Fitting does not seem to thread correctly
Double-check that you are using the correct fitting for the intended connection (3/4" union nut to 1/2" male thread). Ensure there is no cross-threading and that both connecting parts are clean.
Difficulty tightening the union nut
Ensure the threads on both the fitting and the water meter are clean and free of obstructions. Use appropriate plumbing tools for leverage, but apply force carefully to avoid damaging the threads or the fitting.
Pros and Cons
Pros
- Facilitates conversion between common water meter thread sizes.
- Durable brass construction ensures a long lifespan.
- Includes necessary seals for immediate installation.
- Designed with sealing holes for a more secure connection.
Cons
- Requires careful measurement to ensure correct fitment.
- Conversion chart is in the pictures, not on the product itself.
- May require additional tools for installation.
Setup, Compatibility & Care
Setup:
- Ensure both the 3/4 inch union nut and the 1/2 inch male thread components are clean and free of debris.
- Place the provided seals onto the appropriate parts of the fitting.
- Connect the 3/4 inch union nut side to the water meter and the 1/2 inch male thread side to the pipework or adapter.
- Tighten securely, ensuring the seals are compressed for a watertight fit. Do not overtighten.
Compatibility:
This fitting is specifically designed for a 3/4 inch union nut and a 1/2 inch male thread. Always refer to the product images for the conversion chart to confirm compatibility with your specific water meter and pipe dimensions. It is intended for use with DN 15 applications.
Care:
Given its brass construction, this fitting requires minimal care. Periodically check connections for any signs of leakage. Avoid using abrasive cleaners that could damage the brass finish.