Plastic Blanking End Caps IBC Tank - S60X6 - Pack of 5 - Funitric
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for users of Funitric Plastic Blanking End Caps designed for IBC tanks. The key benefit is a simple, secure way to cap off S60x6 threaded IBC tank valves, preventing leaks and contamination. A potential caveat is ensuring the S60x6 thread specification matches your valve exactly. These caps offer a straightforward solution for sealing IBC tank outlets, providing protection and ease of use with their standard 60mm inlet diameter and S60x6 thread.
All features
| Brand | Funitric |
|---|
Extended Product Information
FAQs
What does S60x6 mean?
S60x6 refers to the thread standard for IBC tank valves. 'S' indicates a coarse thread, '60' is the nominal outer diameter in millimeters, and '6' is the pitch (distance between threads) in millimeters.
How do I know if my IBC valve has an S60x6 thread?
Most IBC tanks use this standard. You can measure the outer diameter of the valve's threaded part (should be around 60mm) and check the distance between threads. Visually comparing with images online or checking your tank's specifications is also effective.
Can I use these caps for hazardous chemicals?
These caps are designed for general sealing. For hazardous chemicals, always consult the chemical's safety data sheet and ensure the cap material is compatible and provides an adequate safety seal for your specific application.
How many caps are included in a pack?
Each pack contains 5 plastic blanking end caps.
Are these caps suitable for high-pressure systems?
No, these blanking end caps are intended for low-pressure applications such as sealing off unused outlets on IBC tanks. They are not designed to withstand significant internal pressure.
Can I paint or modify these caps?
While you can technically paint them, it's not recommended as it could affect the seal or material integrity. Modifying the caps is not advised as it may compromise their function and safety.
Troubleshooting
Cap does not screw on easily.
Ensure you are using the correct S60x6 thread and that both the cap and valve threads are clean and free from obstructions. Try backing it off and re-aligning the threads carefully.
Cap feels loose after tightening.
Check that the cap is fully engaged with the valve threads. Ensure you are tightening it sufficiently by hand. If it continues to feel loose, there may be a slight incompatibility with the specific valve. Ensure no debris is preventing a full seal.
Cap is difficult to remove.
If the cap was overtightened, try using a strap wrench or rubber grip to increase leverage for removal. Avoid using excessive force that could damage the valve or cap.
Pros and Cons
Pros
- Provides a secure and reliable seal for IBC tank outlets.
- Easy to install and remove without tools.
- Durable plastic construction ensures longevity.
- Comes in a cost-effective pack of five.
- Protects the valve from dust and contaminants.
Cons
- Only compatible with S60x6 threaded valves.
- Plastic material may degrade with prolonged exposure to harsh UV or chemicals.
- Not suitable for high-pressure applications.
- May require significant force to tighten on some valves if threads are not perfectly clean.
Setup, Compatibility & Care
Setup:
- Ensure the S60x6 thread on your IBC tank valve is clean and free from debris.
- Align the threads of the end cap with the threads on the IBC tank valve.
- Screw the cap on clockwise by hand until it is snug and secure. Do not overtighten, as this can damage the threads.
Compatibility:
- These caps are specifically designed for IBC tank valves with an S60x6 thread. This is a coarse thread measuring approximately 60mm in diameter.
- They are not compatible with fine-threaded valves or valves with different thread sizes.
- Always verify your IBC tank valve's thread specification before purchasing.
Care:
- Clean the caps with mild soap and water as needed. Rinse thoroughly and allow to air dry.
- Avoid using abrasive cleaners or solvents, which can damage the plastic.
- Store the caps in a dry place away from direct sunlight when not in use to prolong their lifespan.