Mintex M1144 Brake Pads - MDB3385M1144

They are suitable for fast road use, track days, and light race use in lightweight cars, or as a rear pad upgrade for saloons and hot hatches.

The Mintex M1144 pads require a short bedding-in process, which can typically be done effectively during track use.

No, they are designed as low-noise pads, offering a quieter experience compared to many other performance brake pads.

They offer medium fade resistance, which is suitable for track day use on lighter cars or as a performance upgrade for spirited driving. For prolonged, extreme track sessions on heavier vehicles, dedicated race pads might be considered.

Yes, the Mintex M1144 pads are formulated without asbestos and heavy metals.

While they can be used as a rear upgrade or on lightweight cars, they are primarily recommended for lightweight vehicles or as a rear pad for saloons and hot hatches due to their performance characteristics and medium fade resistance.

This set includes 4 pads, which is sufficient for one axle set (either front or rear).

Ensure pads were bedded in correctly. Check for debris between the pad and rotor. Uneven rotor surface can also cause noise; consider rotor inspection or replacement. Ensure anti-squeal shims are correctly installed if applicable.

Verify the bedding-in process was completed. Check for brake fluid leaks or low fluid levels. Inspect rotors for warping or excessive wear. Ensure there are no obstructions in the brake lines.

This can indicate issues with the caliper or bracket. Ensure the caliper slides freely and the bracket is not damaged. Check for warped rotors or debris causing uneven contact.