Soaker Hose Pipe - Green

It releases water slowly and directly at the soil level, minimizing evaporation and runoff, ensuring more water reaches plant roots efficiently.

This hose is designed for low-pressure systems. Running it on high pressure can cause water to spray rather than seep and may damage the hose.

Yes, multiple hoses can be connected with a little adjustment to cover larger areas. Ensure connections are secure.

Periodically check the small holes for blockages. If clogged, gently clear them with a thin pin or wire. Store the hose drained and dry when not in use.

It is ideal for laying in borders, garden beds, allotments, along hedges, or around shrubs where direct, deep watering is needed.

Yes, it is well-suited for low-pressure systems, including those powered by water butts, as it operates effectively without high water pressure.

Ensure the hose is drained after use and stored away from direct sunlight and frost. Check for and clear any blockages in the perforations as needed.

Ensure the water source is turned on and providing low pressure. Check that the hose is not kinked or blocked. Verify that all connections are secure.

Make sure the hose is laid flat on the soil surface without kinks. Ensure the water pressure is consistent. For longer runs, consider using multiple shorter hoses connected together rather than one very long one.

The water pressure is likely too high. Reduce the flow from your tap or install a pressure-reducing valve. This hose is designed for slow seepage, not high-pressure spray.

Gently straighten the hose. The wide-based fins are designed to minimize this, but careful placement and avoiding sharp bends can help.

Ensure the connectors are clean and dry. A slight twist and firm push may be required. For persistent issues, check for any debris in the connector ends.