Best current price£12.03from B&Q
Shopping.co.uk recommended and popular offers
B&Q£12.03Visit shop B&Q - Unifine Air Under Seal Under Coating Under Body Spray Gun Schutz Schultz
Visit shop2 offers from £12.03
View price history by clicking the chart icon.
This air-powered undersealing gun is designed for automotive professionals and DIY enthusiasts applying underbody coatings. Its key benefit is efficient and consistent application of schutz-type products, ensuring thorough coverage with trigger-controlled precision. A minor consideration is its average air consumption of 11 CFM, requiring an adequate air supply. It features trigger operation, a 1/4" BSP male air inlet, and is suitable for use with standard 1L schutz cans, offering a spray distance of 12-18 inches. The gun is lightweight, easy to clean, and designed for low maintenance.
| Model Part Number | TE339 |
|---|---|
| Brand | AB Tools |
This gun is designed for use with schutz-type underbody coatings that come in standard 1-litre cans. Always refer to the coating manufacturer's recommendations for suitability with spray application equipment.
The gun is suitable for use up to 80 psi. It is recommended to start with a lower pressure and adjust as needed, ensuring consistent air flow.
The gun features a 1/4" BSP male air inlet. You will need a compatible air hose and fitting for your compressor.
The optimal spray distance for this gun is between 12 and 18 inches from the surface you are coating.
This product is the spray gun only. Air hoses and undercoating cans are sold separately.
The average air consumption is 11 CFM. Ensure your air compressor can supply this volume of air to operate the gun effectively.
Immediately after use, disconnect from air and remove the can. Flush the gun with the recommended cleaning solvent for the undercoating product you used until clear. Refer to the care instructions for detailed steps.
Check air supply is connected and pressurized. Ensure the schutz can is properly seated and not empty. Verify the trigger is being depressed fully. Clean any blockages in the nozzle or internal passages.
Adjust the spray distance (12-18 inches). Ensure the can is not empty and has sufficient material. Check for consistent air pressure. Clean the nozzle for obstructions.
Ensure the air hose is securely connected to the 1/4" BSP inlet. Check the integrity of the air hose O-ring or fitting. Tighten any loose connections.
The can may be low on product or not properly sealed. Ensure the can is securely attached. Check for air bubbles in the fluid path. Clean the nozzle and internal passages.
Clean the gun immediately after use before the undercoating material dries. Use the recommended cleaning solvent for the specific undercoating product you are using. Flush thoroughly.
Setup:
Compatibility:
Care:
