Best current price£23.99from eBay
Shopping.co.uk recommended and popular offers
eBay£23.99Visit shop Kitchen Wall Mounted Cold Water Tap Single Lever 'C' Type Chrome Plated Brass
Visit shop
B&Q£34.99Visit shop B&Q - Kitchen Cold Water Tap Single Lever Handle 'c' Type Wall Mounted
Visit shop2 offers from £23.99 - £34.99
View price history by clicking the chart icon.
This Invena Kitchen Cold Water Tap is designed for homeowners seeking a durable and stylish single-lever tap for their kitchen's cold water supply. Its key benefit is a blend of classic and contemporary design with robust chrome-plated brass construction. A potential caveat is that it is solely for cold water use and requires a minimum working pressure of 0.5 MPa (5 bar). The tap features a single flow, a ceramic single lever valve for smooth operation, and a C-type spout, all finished in a sleek silver chrome.
| Colour | Silver |
|---|---|
| Brand | Invena |
No, this is specifically a cold water tap and is not designed to be connected to a hot water supply.
The tap features a standard 1/2" BSP thread size for connection to your plumbing.
The maximum recommended working pressure is 0.5 MPa (5 bar).
Wipe with a soft, damp cloth. Avoid abrasive cleaners or pads to prevent scratching.
It uses a ceramic disc valve for durable and smooth operation.
Yes, provided the sink has a standard tap hole and the plumbing is compatible with the minimum pressure requirement of 0.5 MPa (5 bar).
Check that the handle is fully closed. If the dripping persists, the ceramic disc valve may need replacement, or ensure there are no debris particles causing interference.
Ensure the water supply is fully open. Check the aerator (if applicable) for blockages and clean it. Verify that the water pressure meets the minimum requirement of 0.5 MPa (5 bar).
The ceramic disc valve may require lubrication or replacement. Ensure no debris has entered the valve mechanism.
Check water pressure. If pressure is too high, a pressure-reducing valve may be needed. Ensure all connections are secure.
Setup: Installation requires connecting the tap to the cold water supply line using its 1/2" BSP thread. Ensure the water supply is turned off before beginning. Secure the tap firmly to the sink or countertop, ensuring a watertight seal. Professional installation is recommended if you are not experienced with plumbing.
Compatibility: This tap is designed for cold water lines only. It requires a minimum working pressure of 0.5 MPa (5 bar). Ensure your plumbing system meets this requirement for optimal performance.
Care: To maintain the tap's shine, regularly clean the chrome surface with a soft, damp cloth. Avoid using abrasive cleaners or scouring pads, as these can scratch the finish. For stubborn water spots, a mild soap solution can be used, followed by rinsing and drying.
