Clarke & Clarke Wallpaper - Dipinto - Pewter

Use a high-quality, heavy-duty wallpaper paste suitable for textured and metallic wallpapers. Refer to the wallpaper manufacturer's specific recommendations for the best results.

While it can be used in low-moisture areas like a powder room, it is not recommended for high-humidity environments like showers or steamy bathrooms due to the risk of moisture damage to the texture and metallic elements.

The grit detail is best maintained by dusting with a soft, dry cloth. Avoid vigorous scrubbing or wet cleaning, which could dislodge the grit or damage the surrounding material.

The actual pattern repeat for this wallpaper is 16cm.

Be careful not to crease or rub the metallic areas too firmly during application, as this could affect their finish. Use a soft brush or roller and apply gentle pressure.

It is not considered fully washable. Gentle cleaning with a slightly damp cloth is permissible for minor marks, but excessive moisture should be avoided.

Ensure the wall surface is properly prepared (clean, dry, smooth, primed). Use the correct type and amount of wallpaper adhesive. Check for drafts during drying.

Double-check the pattern repeat measurement before cutting. Use a straight edge and sharp blade for precise trimming. Ensure strips are hung plumb.

Smooth out bubbles towards the nearest edge using a wallpaper brush or smoother immediately after hanging. If bubbles appear after drying, they may need to be carefully pricked with a pin and smoothed.

Avoid harsh cleaning methods. Gently wipe with a dry or very slightly damp soft cloth. Ensure no abrasive materials come into contact with the metallic areas.