Best current price£19.19from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£19.19Visit shop Spraymax 680044 1K Dtp Plastic Topcoat Aerosol 400Ml - Matt Dark/Grey 4015962888890
Visit shop1 offer from £19.19
View price history by clicking the chart icon.
The SprayMax 1K DTP Plastic Topcoat Aerosol is designed for automotive refinishing enthusiasts and professionals who need a reliable, high-quality finish for plastic components. Its primary benefit is the ability to adhere directly to various plastic surfaces without requiring a separate adhesion promoter, saving time during prep. The main caveat is that it is formulated specifically for plastic substrates, so it may not provide the same results on metal or wood surfaces, and users should ensure the surface is thoroughly cleaned before application.
| Colour | Grey |
|---|---|
| Model Part Number | 680044 |
| Brand | SprayMax |
| Container Volume | 400ml |
While the product offers high adhesion, a light scuffing with a fine-grade abrasive pad can improve mechanical bonding for long-term durability.
No, this product is specifically engineered for plastic surfaces and may not adhere correctly to bare metal or other non-plastic materials.
Allow 5-10 minutes between coats depending on ambient temperature and humidity.
The SprayMax 1K DTP is designed as a topcoat, meaning it provides the final matte finish, so a clear coat is not required.
This specific aerosol provides a professional matte grey finish.
Each canister contains 400ml of product.
The surface likely contained silicone, wax, or grease. Clean the surface thoroughly with a plastic-safe degreaser and lightly scuff the plastic before reapplying.
The paint was applied too heavily. Use thin, overlapping coats and allow for proper flash-off time between layers.
Remove the nozzle and soak in a mild lacquer thinner or replace it if the obstruction persists.
To achieve the best results, shake the canister vigorously for at least two minutes before use. Always perform a test spray on a piece of scrap material to ensure the nozzle is clear and the spray pattern is consistent. For compatibility, this product works well on EPDM, PVC, and polycarbonate, but it is recommended to test a small, inconspicuous area first. After use, clear the nozzle by holding the can upside down and spraying until only propellant escapes to prevent clogging.
