Best current price£26.01from eBay
Shopping.co.uk recommended and popular offers
eBay£26.01Visit shop TREND PRO 4/60 TCT 22MM X 19MM STRAIGHT ROUTER CUTTER BIT 1/2"" SHANK
Visit shop5 offers from £26.01 - £51.95
View price history by clicking the chart icon.
The Trend Professional Two Flute Straight Router Cutter is an essential tool for professional woodworkers and serious hobbyists who require precise, clean edges in abrasive materials like MDF, chipboard, and hardwood. Designed for stability, this cutter delivers a superior finish due to its high-quality tungsten carbide tipped (TCT) construction, though its 1/2 inch shank necessitates a router capable of accommodating larger bit sizes, which may exclude some smaller trim routers.
| Model Part Number | 4/60X1/2TC |
|---|---|
| Brand | Trend |
No, this bit is designed specifically for a 1/2 inch collet. Using an adapter is not recommended for this size as it can compromise safety and stability.
The cutting length is 19mm. For deeper cuts, it is recommended to perform multiple passes.
No, this bit is engineered for wood, plywood, MDF, chipboard, and hard plastics. It is not designed for metalworking.
You will notice increased resistance when feeding, a burning smell, or rough/chipped edges on the material surface.
The TCT plunge centre tip allows the cutter to enter the material vertically like a drill bit, which is useful for starting slots or mortises in the middle of a board.
Increase your feed rate or ensure you are not taking too deep of a cut in a single pass.
Check that the collet is clean and the nut is properly tightened; ensure the bit is not damaged.
Clean the collet and shank thoroughly with degreaser and ensure the router nut is tightened to the manufacturer's torque specifications.
To ensure safety and performance, always secure the bit in a clean, debris-free 1/2 inch collet. Insert the shank until it touches the bottom of the collet, then withdraw it slightly (about 2-3mm) before tightening to prevent bottoming out.
Maintenance Tips:
