This set of H&R performance lowering springs is designed for the rear axle of compatible VW Transp...This set of H&R performance lowering springs is designed for the rear axle of compatible VW Transporter and Multivan models. The springs offer a lowered suspension of approximately 40mm. They are suitable for vehicles without the 'bad road' version and have an axle load capacity for the rear axle from 1561kg or 1551kg. The fitting position is the rear axle, and the spring design is a coil spring. Compatible vehicle types include 7HC, 7HMA, 7J0, Transporter V Bus (7HB, 7HJ, 7EB, 7EJ, 7EF, 7EG, 7HF, 7EC), Multivan V (7HM, 7HN, 7HF, 7EF, 7EM, 7EN), Transporter V Kastenwagen (7HA, 7HH, 7EA, 7EH), Multivan VI (SGF, SGM, SGN), Transporter VI Bus (SGB, SGG, SGJ), and Transporter VI Kastenwagen (SGA, SGH).
H+R Rear Lowering Spring for VW CARAVELLE Mk VI 29270HA2Free delivery in 1–3 days£104.05Visit shop →
1x H+R Replacement Rear Lowering Spring 29270-2HA 1561kg> Axle Loading 29270HA2Free delivery in 1–3 days£104.05Visit shop →
H+R Rear Lowering Spring for VW TRANSPORTER Mk V Van 29270HA2Free delivery in 1–3 days£104.05Visit shop →
H+R Rear Lowering Spring for VW MULTIVAN Mk V 29270HA2Free delivery in 1–3 days£104.05Visit shop →
H+R Rear Lowering Spring for VW TRANSPORTER / CARAVELLE Mk V Bus 29270HA2Free delivery in 1–3 days£104.05Visit shop →
H+R Rear Lowering Spring for VW TRANSPORTER Mk VI Van 29270HA2Free delivery in 1–3 days£104.05Visit shop →
H+R Rear Lowering Spring for VW TRANSPORTER / CARAVELLE Mk VI Bus 29270HA2Free delivery in 1–3 days£104.05Visit shop →
Product Information
Full details
This guide helps owners of VW Transporter and Multivan models understand and utilize H&R Performance Lowering Springs (29270HA2) for enhanced vehicle handling and aesthetics. These springs provide a 40mm drop in the rear suspension. Note that these springs are designed for vehicles *without* the 'bad road' version.
All features
Model Part Number
29270HA2
Brand
H&R
Extended Product Information
FAQs
What is the primary benefit of installing these springs?
Improved handling and a more aggressive stance for your VW Transporter or Multivan.
Do I need to replace any other components when installing these springs?
It is recommended to replace the shock absorbers at the same time and a wheel alignment is *required* after installation.
Can I install these springs myself?
While technically possible, professional installation is *highly recommended* due to the complexity and safety considerations.
What is the drop height provided by these springs?
Approximately 40mm.
Are these springs compatible with all VW Transporter and Multivan models?
No, they are *not* compatible with vehicles equipped with the 'bad road' suspension option. Verify axle load capacity compatibility.
What is the axle load capacity?
The springs are suitable for rear axles with a load capacity from 1561kg or 1551kg.
Will these springs affect my vehicle's warranty?
This depends on your warranty terms. Consult your warranty documentation or dealer for clarification.
Troubleshooting
Vehicle sits unevenly after installation.
Check spring seating and ensure all components are properly installed and torqued. Have the alignment checked.
Ride quality is harsher than expected.
Ensure the springs are the correct part number for your vehicle. Verify tire pressures are correct.
Clunking noises from the rear suspension.
Check all suspension components for looseness. Inspect the shock absorbers and mounting points.
Pros and Cons
Pros
Improved handling and cornering performance.
Enhanced vehicle aesthetics with a lowered stance.
Specifically designed for VW Transporter and Multivan models.
Durable coil spring construction.
Reduced body roll for a more controlled driving experience.
Cons
Requires professional installation.
Ride quality may be firmer compared to stock springs.
Not compatible with 'bad road' version vehicles.
May require alignment after installation.
Setup, Compatibility & Care
Setup:
Professional Installation: Installation is recommended to be done by a qualified mechanic with experience in suspension systems.
Tools Required: Ensure you have the necessary tools, including a spring compressor, jack, jack stands, and appropriate wrenches.
Follow Instructions: Carefully follow the manufacturer's installation instructions to ensure proper fit and function.
Torque Specifications: Adhere to all torque specifications provided during installation.
Alignment: After installation, a wheel alignment is *mandatory* to ensure proper handling and tire wear.