Simpson Strong Tie Heavy Duty Angle Bracket - Silver

The bracket is designed for connecting timber at 90-degree angles, providing structural support.

The bracket is made from pre-galvanized mild steel.

Yes, the pre-galvanized steel construction makes it suitable for both interior and exterior use.

Use screws, nails, or bolts recommended for the timber type and the required load capacity. Refer to Simpson Strong-Tie specifications.

Ensure the timber surfaces are clean and aligned, position the bracket correctly, use appropriate fasteners, and verify the secure fastening and alignment.

It is suitable for fastening small trusses, cladding plates, uprights, rafter anchors, cantilevers, and headers.

Clean off any surface rust and consider replacing the bracket or adding a protective coating if the corrosion is extensive.

It may be necessary depending on the timber type. Refer to installation guidelines.

Ensure the timber surfaces are flat and free of debris. Use shims if necessary to achieve a flush fit.

Check if the correct fasteners are used for the timber type and load. Ensure fasteners are fully driven and not stripped.

Clean off any surface rust with a wire brush. If the corrosion is extensive, consider replacing the bracket or adding a protective coating.