Euroshowers White Waterproof Bath, Shower, Window And Sink Seal Tape 38mm X 3.2M - White

The tape is suitable for clean, dry, and smooth surfaces such as ceramic tiles, glass, laminate, and sealed wood. It's best to avoid porous or unsealed materials.

Clean the tape with a soft, damp cloth and a mild soap solution. Rinse with clean water and dry thoroughly. Avoid abrasive cleaners.

While the tape provides a waterproof barrier, it is primarily designed for interior wet areas like bathrooms and kitchens. Long-term exposure to direct sunlight and harsh weather conditions may affect its durability.

This sealing tape is not designed to be painted over. Its surface may not adhere well to paint, and the paint could crack or peel.

Each roll measures 3.2 meters (approximately 10.5 feet) in length.

The tape is 38mm (approximately 1.5 inches) wide.

It is generally not recommended to apply this tape directly over existing silicone sealant. It should be applied to the base surfaces before sealant is applied, or as a temporary measure if the original sealant has failed and needs replacement.

Ensure surfaces are completely clean, dry, and free of any residue before application. Press down firmly along the entire length of the tape. For difficult surfaces, consider using a mild primer designed for tapes.

Carefully lift the edge of the tape where the bubble is located and reapply, smoothing it down firmly as you go. In some cases, a small pin prick can release trapped air, but this may compromise the waterproof seal.

Check if the tape was applied correctly with continuous pressure. Ensure the tape is covering the entire gap. For persistent leaks, the gap might be too large or irregular for tape alone, and a silicone sealant may be required.

Ensure edges are clean and dry. Press the corners down firmly. If lifting persists, a small amount of waterproof adhesive or sealant can be applied to the edges.