Trend Craft Saw Blade - 165mm x 40T x 20mm

This saw blade is designed for soft wood, hard wood, plasterboard, stone fibre board, particle board, veneer, plywood, MDF, and hardboard.

The CSB/16540T blade is designed for cordless saws and is compatible with Dewalt trimsaws DC390, DCS391, etc. It is not suitable for the Bosch GSK 24.

Clean the blade after each use to remove resin and debris. Store in a dry place. Regularly inspect for damage and sharpen or replace as needed.

Always wear safety glasses and hearing protection when operating the saw. Ensure the blade is securely installed. Allow the blade to reach full speed before cutting and avoid forcing the blade.

Thin kerf blades remove less material during the cut, which means less effort is required from the saw and can extend battery life in cordless saws.

The blade's information is laser etched on the reverse side to the European standard EN847-1/2.

Check the blade for damage (e.g., chipped teeth). Replace the blade if necessary. Ensure you are using the correct blade for the material.

Ensure the blade is aligned correctly. Reduce the feed rate, and avoid forcing the cut. Check for any obstructions.

Ensure the correct blade is being used for the material. Check the blade for damage and replace as necessary. Adjust the cutting speed.