Plumbright Equal Tee - 15mm - 25 Pack
Best current price£0.76from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£0.76Visit shop Plumbright Endfeed Equal Tee 15Mm 78705
Visit shopCity Plumbing GB£0.76Visit shop All Offers
2 offers from £0.76 - £15.74
View price history by clicking the chart icon.
Plumbright Endfeed Copper Fitting Equal Tee 15Mm 25 PackFree delivery in 1–3 days£15.74Visit shop →
Product Information
Full details
The Plumbright End Feed Equal Tee is designed for professional plumbers and serious DIY enthusiasts who require secure, permanent piping connections. Its primary benefit is the ability to create robust, leak-proof joints in copper piping using traditional solder methods. While this product offers exceptional reliability for both water and gas systems, it requires a soldering torch and proper safety equipment for successful installation, making it less accessible for those without basic plumbing experience.
All features
| Model Part Number | 78705 |
|---|---|
| Brand | Plumbright |
Extended Product Information
FAQs
Can I use this for gas lines?
Yes, this fitting is rated for use in low-pressure domestic gas installations.
Does this pack include solder wire?
No, solder wire and flux must be purchased separately.
Is this fitting compatible with plastic pipe?
No, this is specifically designed for copper piping only.
What is the material of the fitting?
These are high-quality copper alloy fittings.
Do I need to clean the pipes before soldering?
Yes, proper preparation with an abrasive pad is essential for a leak-proof seal.
Can this be used on outdoor water lines?
Yes, provided the pipe is protected from freezing temperatures, which could damage both the pipe and the joint.
Troubleshooting
Solder will not flow into the joint
Ensure the pipe is sufficiently heated and that enough flux has been applied to remove oxidation.
Joint leaks after cooling
The fitting was likely under-heated during application; clean the joint, re-apply flux, and re-solder.
Pipe fits too loosely in the tee
Verify that you are using standard gauge 15mm copper tubing; thin-wall pipes may not seat correctly.
Pros and Cons
Pros
- Extremely durable, permanent connection
- Suitable for both water and gas systems
- Cost-effective for multi-connection projects
- Compatible with standard 15mm copper piping
- High heat resistance for complex piping runs
Cons
- Requires soldering tools and materials
- Open flame use involves safety risks
- Not suitable for use with plastic piping
- Requires skill to ensure proper solder flow
Setup, Compatibility & Care
Installation Steps
- Cut your 15mm copper pipe to length, ensuring edges are deburred.
- Clean the outer surface of the pipe and the inner surface of the tee fitting with wire wool.
- Apply a thin, even coat of soldering flux to both surfaces.
- Assemble the joint and apply heat using a blowtorch until the flux bubbles.
- Feed the solder wire into the joint, allowing it to melt and flow into the seam via capillary action.
Compatibility
This product is strictly compatible with standard 15mm copper pipe. It is not suitable for PEX, PVC, or other plastic piping materials. Always verify local building codes before installing this fitting in gas lines.
Care
Once soldered and cooled, these fittings are virtually maintenance-free. Periodically check for signs of green oxidation or moisture at joints, which may indicate a poor initial bond.