Mipa 1K Adhesion Promoter Spray - 400ml
Best current price£19.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£19.99Visit shop B&Q - Paints1K Adhesion Promoter Spray 400Ml
Visit shopB&Q£19.99Visit shop One Offer
1 offer from £19.99
View price history by clicking the chart icon.
Product Information
Full details
The Mipa 1K Adhesion Promoter is a high-performance surface preparation spray designed for professional painters and automotive hobbyists who need a reliable bond on difficult-to-coat surfaces like plastics, metals, and chrome. It excels by eliminating the need for aggressive sanding, effectively creating a professional foundation for both 1K and 2K topcoats without impacting the final finish; however, it requires strict adherence to environmental conditions, specifically maintaining temperatures above 10°C to ensure proper chemical curing.
All features
| Model Part Number | 213360000 |
|---|---|
| Brand | Mipa |
Extended Product Information
FAQs
Can I use this on engine parts?
While it works on many metals, it is primarily an adhesion promoter for aesthetic coatings and may not be suitable for extreme, high-heat engine environments.
Do I need to sand the surface at all?
The product is designed to minimize sanding, but you should still ensure the surface is clean, free of loose debris, and properly degreased.
Does this product change the color of the paint?
No, the Mipa 1K Adhesion Promoter is completely clear and will not affect the final color of your topcoat.
How long should I wait before applying the topcoat?
You can typically proceed once the promoter is dust-dry, which takes about 10 minutes at 20°C.
Is this compatible with 2K paint systems?
Yes, it is designed to act as an effective foundation for both 1K and 2K paint systems.
What is the recommended storage temperature?
Store in a cool, dry location. Avoid temperatures exceeding 50°C and keep away from ignition sources.
Troubleshooting
The paint is flaking after application
This often occurs if the surface was not properly cleaned of oils or silicones before applying the promoter. Ensure thorough degreasing.
Finish appears cloudy or milky
This may be caused by applying the product in high humidity or temperatures below 10°C, which prevents proper solvent evaporation.
Spray nozzle is clogging
Always clear the nozzle by turning the can upside down and spraying for 2-3 seconds after each use.
Pros and Cons
Pros
- Significantly reduces preparation time by minimizing sanding
- Excellent bonding on difficult surfaces like chrome and plastic
- Clear formula preserves original aesthetic
- Fast drying time enhances overall workflow productivity
Cons
- Sensitive to temperature, requiring above 10°C for application
- Performance can be compromised if humidity exceeds 75%
- Not intended for use on all high-temperature engine components
Setup, Compatibility & Care
To ensure the best performance, shake the aerosol can thoroughly before use. Apply the promoter in a well-ventilated area, ensuring the ambient temperature is at least 10°C and humidity remains below 75%.
Compatibility Table:
| Material Type | Suitability |
| :--- | :--- |
| Plastics | Excellent |
| Chrome/Brass/Copper | Excellent |
| Steel/Aluminum | Good |
After use, invert the can and spray briefly to clear the nozzle and prevent clogging. Store the can in a cool, dry place away from direct sunlight to maintain the integrity of the chemical contents.