Duratool Desoldering Pump - D03319
Best current price£8.17from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£8.17Visit shop B&Q - DuratoolDesoldering Pump With Metal Plunger
Visit shopB&Q£8.17Visit shop All Offers
2 offers from £8.17
View price history by clicking the chart icon.
Product Information
Full details
The Duratool Desoldering Pump (D03319) is a reliable, manual vacuum tool designed for electronics hobbyists and professional technicians who need to remove molten solder from circuit boards cleanly and efficiently. Featuring a robust metal plunger and a heat-resistant Teflon tip, it offers excellent suction power for precise component desoldering; however, users should be aware that the manual spring-loaded mechanism requires occasional cleaning to maintain consistent suction strength.
All features
| Model Part Number | D03319 |
|---|---|
| Brand | duratool |
Extended Product Information
FAQs
Can I replace the tip when it wears out?
Yes, the Duratool D03319 features a replaceable Teflon tip that can be swapped out once it degrades.
Is this pump suitable for Surface Mount Devices (SMD)?
While it can be used for larger SMD components, it is primarily designed for through-hole component desoldering.
Does it come with a cleaning tool?
The product is the pump unit; ensure you have a standard needle or thin wire handy for cleaning the nozzle if it becomes obstructed.
How do I clear the internal solder waste?
Unscrew the front nozzle section and tap the body of the pump against a waste bin to empty the accumulated solder beads.
What material is the tip made of?
The tip is made from high-quality, heat-resistant Teflon to prevent damage from accidental contact with a hot soldering iron.
Troubleshooting
Weak suction power
Clean the internal barrel and ensure the nozzle tip is tightly screwed on to maintain an airtight seal.
Plunger sticks
Clean the internal shaft and apply a very thin layer of high-temperature silicone grease to the plunger seal.
Solder clogs the tip
Use a small needle or cleaning wire to clear the nozzle opening while the tip is still warm.
Pros and Cons
Pros
- Durable metal construction
- Replaceable nozzle for long-term use
- Strong vacuum force for clean board surfaces
- Easy to disassemble for routine maintenance
- Lightweight and portable design
Cons
- Requires manual cocking between each use
- Requires periodic internal cleaning to prevent clogs
- No integrated heating element; requires a separate soldering iron
Setup, Compatibility & Care
Setup is straightforward: simply push the plunger down until it clicks into the locked position. To maintain the tool, periodically unscrew the front nozzle to remove residual solder beads trapped in the barrel. If the suction power decreases, it often indicates that the nozzle opening is blocked or that the internal seal needs a small amount of heat-safe lubricant. Always replace the Teflon tip if you notice it becoming frayed or warped, as a perfect airtight seal is necessary for maximum suction performance.