Best current price£18.46from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£18.46Visit shop Liberon White 126950 Floor Sealer 1 Litre
Visit shop
The Range£24.59Visit shop Liberon Floor Sealer 1 Litre - Oil-Based Finish - 126835 - Clear
Visit shop9 offers from £18.46 - £24.99
View price history by clicking the chart icon.
The Liberon Floor Sealer (1 Litre - White) is designed for interior wooden floors and unvarnished cork surfaces, offering a natural, oil-based finish that protects against stains and scratches. It's ideal for preparing floors before waxing or varnishing, providing resistance to water, heat, and alcohol while enhancing the wood's natural color. While it offers a durable, attractive finish on its own, it requires proper application and drying times for optimal results.
| Colour | White |
|---|---|
| Model Part Number | 126950 |
| Brand | Liberon |
The coverage rate is approximately 8-10 square meters per litre.
No, Liberon Floor Sealer is designed specifically for interior use only.
A minimum of 5 hours drying time is required between coats. Full curing may take longer.
Tools should be cleaned immediately after use with White Spirit.
Yes, it can be used alone to achieve a final satin to gloss finish.
Yes, it is suitable for sealing unvarnished cork surfaces.
It enhances the natural color of new and old wood, providing a sealed finish.
Apply thinner coats and ensure even distribution with the brush or cloth. Avoid overworking the product. Ensure the surface is smooth before application.
Ensure adequate ventilation and a consistent room temperature. Check that previous finishes or contaminants have been completely removed. Do not apply excessively thick coats.
This may indicate an incompatibility or that the product was applied too thickly. Ensure the surface was properly prepared and consider a light sanding if necessary, followed by reapplication of a thin coat.
Ensure the Floor Sealer was fully dry and cured before applying the top coat. Surface preparation is key; ensure no dust or contaminants are present.
Setup:
Ensure the wooden floor is clean, dry, and free from dust, grease, and old finishes. If applying over a previous finish, test for compatibility and remove if necessary.
Application:
Apply Liberon Floor Sealer using a brush or cloth in thin, even coats. Allow a minimum of 5 hours drying time between coats. For best results, apply 2-3 coats, allowing adequate drying time for each. If applying wax or varnish, ensure the sealer is fully dry and cured according to product instructions.
Compatibility:
Suitable for interior wooden floors and unvarnished cork surfaces. It is designed to be used as a base for waxing and varnishing, or as a standalone finish.
Tool Cleaning:
Clean application tools immediately after use with White Spirit.
