Best current price£55.00from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£55.00Visit shop Securefix Direct (12Kg) Galvanised Steel Hinged Plough Anchor (Delta)
Visit shop
B&Q£70.00Visit shop B&Q - Galvanised Steel Hinged Plough Anchor 12Kg (Delta Style Yacht Boat Marine Sea)
Visit shop2 offers from £55.00 - £70.00
View price history by clicking the chart icon.
This 12KG galvanised steel hinged plough anchor is designed for boaters seeking reliable anchoring across various seabed types. Its key benefit is the 'hinged shank' design, which provides superior holding power by preventing breakout during directional changes. A potential caveat is its specific weight class, making it most suitable for vessels within a certain size range where 12KG is appropriate.
| Model Part Number | SFANP12 |
|---|---|
| Brand | SecureFix Direct |
The hinged shank allows the anchor to pivot and re-set itself on the seabed when the direction of pull changes, preventing it from breaking out and ensuring consistent holding power.
This anchor is designed to hold well on all types of seabeds, including sand, mud, and general mixed bottoms. It is also effective on some rocky seabeds, though potential snagging should be considered.
Rinse the anchor thoroughly with fresh water after each use to remove salt, sand, and debris. Allow it to dry completely before storing it.
12KG refers to the weight of the anchor, which is approximately 12 kilograms (about 26.5 lbs). This weight is a key factor in its holding power and suitability for different boat sizes.
The anchor has an overall length of 790mm, an overall width of 340mm, and an overall height of 350mm.
Yes, the hinged shank design provides excellent holding power which is beneficial for offshore anchoring, provided the anchor weight is appropriate for your vessel and sea conditions. Always use adequate rode and consider factors like fetch and expected weather.
The hot-dipped galvanised finish provides a sacrificial layer of zinc that protects the underlying steel from corrosion in marine environments. This significantly extends the anchor's lifespan.
Ensure you have adequate scope (ratio of rode length to depth). Check that the anchor rode is properly attached and there are no knots or tangles. Try a different drop location if the seabed is unusually hard or rocky.
Verify the anchor is fully set by observing for any boat movement relative to a fixed point. Increase scope if necessary. Check for obstructions on the seabed. Ensure the hinged shank is free to pivot.
Small spots may indicate minor damage to the coating. Clean the affected area and apply a suitable cold galvanising compound. Ensure the anchor is thoroughly dried before storage.
Try motoring forward slowly in a wide circle around the snag point. If unsuccessful, use a trip line attached to the anchor's ring, if fitted, or attempt to pull the rode from a different direction.
Setup: Ensure the anchor is securely attached to your anchor rode (chain and/or rope) using appropriate shackles. The anchor is designed to be deployed from the bow roller of a vessel. Always check that the anchor has room to deploy freely without obstruction.
Compatibility: This 12KG anchor is generally suitable for small to medium-sized recreational boats. Consult your boat's manual or an marine expert to confirm if this weight and type of anchor are appropriate for your vessel's size, displacement, and typical operating conditions. It is compatible with standard anchor chain and rope systems.
Care: To maintain the anchor's longevity, rinse it with fresh water after each use, especially after saltwater exposure, to remove salt and debris. Periodically inspect the galvanised finish for any significant damage. Minor scratches are normal wear and tear, but deep gouges may require touch-up with galvanising paint to prevent rust. Store the anchor securely when not in use.
