Best current price£16.99from Minerva
Shopping.co.uk recommended and popular offers
Minerva£16.99Visit shop Minerva Heavy Faux Fabric Deep Red Leather Minerva Core Range Nt-01268-057
Visit shop1 offer from £16.99
View price history by clicking the chart icon.
The Minerva Core Range Heavy Faux Leather Fabric is an ideal choice for DIY enthusiasts, tailors, and crafters seeking a durable, animal-friendly alternative to traditional leather for projects ranging from structured garments to home interior accessories. Offering a robust 530gsm weight, this material provides excellent body and a sophisticated aesthetic for coats, bags, and tablet covers. However, users should note that because it is a non-porous synthetic material, it does not breathe like genuine leather and requires specific sewing techniques to avoid permanent needle marks.
| Model Part Number | NT-01268-057 |
|---|---|
| Brand | Minerva Core Range |
While it is durable, it requires different techniques than standard cotton, such as using clips instead of pins. It is manageable for beginners if they take the time to test on scraps first.
No, this material is designed to be wipe-clean only. Submerging it in water or using a washing machine can damage the finish and the backing.
Yes, it is highly recommended to use a needle specifically designed for leather or denim to ensure clean penetration through the heavy-duty material.
You should never iron the right side of the fabric. If you must press seams, use a low-heat setting from the back side with a pressing cloth, but be extremely careful as heat can permanently damage the material.
The surface is water-resistant and wipeable, but the seams themselves are not sealed, so it should not be considered fully waterproof for outdoor use in heavy rain.
Unlike woven fabrics, this faux leather does not fray at the edges, which allows you to leave raw edges exposed if desired for a specific design aesthetic.
Switch to a new needle specifically designed for leather or vinyl and verify that the stitch length is set to a longer setting.
Use a Teflon-coated presser foot or a walking foot to reduce friction between the machine and the faux leather surface.
Use sewing clips or quilting clips to hold your pattern pieces together instead of traditional sewing pins.
Adjust your machine's thread tension and ensure you are not pulling or stretching the fabric while it feeds through the machine.
When preparing to work with this faux leather, ensure you have a sharp, fresh leather or denim needle installed in your machine to prevent skipped stitches or fabric tearing. Use a longer stitch length (3.0mm to 4.0mm) to avoid perforating the material too closely, which can weaken the seam. For optimal feed, a walking foot or a Teflon-coated presser foot is highly recommended, as standard metal feet may drag or stick against the vinyl surface. To care for your finished projects, simply wipe the surface with a soft, damp cloth and mild soap if necessary. Avoid using harsh solvents or high-heat irons, as these can damage the finish or melt the synthetic structure.
