Polyvine Original Acrylic Scumble - 4L
Best current price£92.21from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£92.21Visit shop B&Q - Original Acrylic Scumble 4L
Visit shopB&Q£92.21Visit shop One Offer
1 offer from £92.21
View price history by clicking the chart icon.
Product Information
Full details
This guide is for DIY enthusiasts and professional decorators looking to create unique, semi-transparent colored paint effects. The key benefit is its one-hour working time, allowing ample manipulation of finishes. A caveat is the need for a 48-hour curing period before applying protective varnish. Polyvine Original Acrylic Scumble is a versatile acrylic glaze that, when mixed with satin or matt emulsion/latex, produces translucent colored effects. It is suitable for various decorative techniques and offers water and wear resistance after proper sealing.
All features
| Brand | Polyvine |
|---|
Extended Product Information
FAQs
What is the working time of Polyvine Original Acrylic Scumble?
The product offers a one-hour working time, allowing ample time for application and manipulation of decorative effects.
What type of paint should I mix with the scumble glaze?
It is designed to be mixed with water-based satin or matt emulsion/latex paints.
How do I make the finish water and wear resistant?
Allow a minimum of 48 hours for the glaze to cure, then protect it with Polyvine Decorators Varnish (gloss, satin, or dead flat).
Can I use this product for any decorative technique?
Yes, it is ideal for colourwashing, stippling, ragging/bagging, dragging, and sponging techniques.
How should I clean my tools after use?
Brushes and tools should be washed immediately after use with water.
Can I use this product outdoors?
Yes, it is suitable for both interior and exterior use, provided it is properly sealed after curing.
Do I need to prime the surface before applying?
Ensure the surface is clean, dry, and properly prepared for optimal adhesion. Priming may be necessary depending on the substrate.
Troubleshooting
Glaze dries too quickly
Ensure you are working in a well-ventilated area but avoid excessive direct heat or drafts. You may need to work in smaller sections or have assistance for larger projects.
Uneven color or streaking
Ensure the glaze is thoroughly mixed with the emulsion/latex. Apply with consistent pressure and direction. Test your technique on a sample board to perfect your application method.
Poor adhesion or peeling
Verify the surface was clean, dry, and properly prepared before application. Ensure the glaze has cured sufficiently (minimum 48 hours) before applying the protective varnish. Use only compatible emulsion/latex paints for mixing.
Brush marks are too visible
Use a high-quality brush suitable for water-based paints and ensure you are using a smooth, consistent application stroke. Consider using a 'drag' technique where brush marks are intentionally part of the effect.
Pros and Cons
Pros
- Generous one-hour working time for complex techniques
- Achieves professional-looking translucent effects
- Easy cleanup with water
- Suitable for various decorative methods
- Durable finish when protected
- Can be used both indoors and outdoors
Cons
- Requires a minimum of 48 hours curing before varnishing
- Best results achieved when mixed with specific emulsion/latex types
- Requires testing on a small area before full application
- Durability depends on the application of a protective varnish
Setup, Compatibility & Care
To set up, first, ensure your surface is clean, dry, and properly prepared. Mix the Polyvine Original Acrylic Scumble with your chosen satin or matt emulsion/latex paint. The ratio will depend on the desired depth of color and translucency. Always test on a small, inconspicuous area before applying to the entire surface. This product is compatible with water-based satin or matt emulsion/latex paints. For washability and wear resistance, allow the applied glaze to cure for a minimum of 48 hours before applying a protective coat of Polyvine Decorators Varnish (available in gloss, satin, or dead flat). Clean brushes, rollers, and tools immediately after use with water.