Hard Saddlebag Lid Weather Strip Seal - CELOMT - CL01002
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The CELOMT Hard Saddlebag Lid Weather Strip Seal is an essential upgrade for Harley-Davidson owners looking to protect their gear from the elements and eliminate rattling lids. Designed as a high-performance replacement for OEM part 90675-93A, these gaskets provide a tighter, more reliable seal against rain, dust, and debris. While they offer superior protection and ease of installation, users should note that they are specifically engineered for ABS touring saddlebags and may not be compatible with aftermarket fiberglass or custom-molded bags.
All features
| Model Part Number | CL01002 |
|---|---|
| Brand | CELOMT |
Extended Product Information
FAQs
Does this kit cover both saddlebags?
Yes, the package includes a pair of rubber seal gaskets, enough for both the left and right saddlebags.
Can I use these on a 2019 Street Glide?
No, these are rated for 1983-2018 models. Check your specific saddlebag style, as 2019 models may use a different lid design.
Do I need to buy extra glue?
No, the gaskets feature a 3M adhesive backing, which provides a strong, permanent bond when applied to a clean, dry surface.
Will these stop my lids from rattling?
Yes, the high-density rubber provides a firmer fit than old, flattened gaskets, which effectively eliminates lid vibration and rattling.
Is this a genuine Harley-Davidson part?
No, this is an aftermarket replacement part manufactured by CELOMT, designed to meet or exceed OEM specifications for Harley part 90675-93A.
Troubleshooting
Gasket is peeling at the corners
This is usually caused by residual oil or old adhesive on the bag. Clean the channel thoroughly with alcohol and use a small amount of rubber-safe contact cement on the corners if necessary.
Lid is difficult to latch after installation
The new gasket is thicker than the worn-out factory seal. This is normal; apply firm, steady pressure to the lid when closing to allow the rubber to compress over the first few uses.
Pros and Cons
Pros
- Durable, long-lasting rubber construction
- Self-adhesive backing simplifies the repair process
- Provides a significantly tighter seal than stock gaskets
- Compatible with a wide range of model years (1983-2018)
- Prevents water ingress during heavy rain
Cons
- Not intended for non-ABS custom saddlebags
- Requires careful cleaning of the old adhesive residue before application
- Sold only as a pair (does not include lid hardware)
Setup, Compatibility & Care
To install, first remove the old, degraded gasket completely. It is critical to use an adhesive remover or isopropyl alcohol to ensure the channel is free of old residue, oil, or dirt; otherwise, the 3M backing may not bond correctly. Peel the backing off the new gasket, align it starting from the hinge side, and press firmly into the channel.
Compatibility includes Harley-Davidson Touring models equipped with ABS hard saddlebags manufactured between 1983 and 2018. To maintain the life of the gasket, avoid using harsh chemical cleaners on the rubber; standard soap and water are sufficient for cleaning. Keep the hinge hardware lubricated to ensure the lid closes with proper pressure against the new seal.