Best current price£4.05from eBay
Shopping.co.uk recommended and popular offers
eBay£4.05Visit shop PrimaPlus Solder Ring Obtuse Elbow 45' 15mm
Visit shop
The Range£4.31Visit shop Prima Plus Primaplus Solder Ring Obtuse Elbow 45' 15Mm - Grey
Visit shop5 offers from £4.05 - £6.53
View price history by clicking the chart icon.
The Prima Plus Solder Ring Obtuse Elbow 45 - 15mm is designed for professional plumbers and experienced DIY enthusiasts who require reliable, efficient pipe connections for water and gas systems. Its primary benefit is the integrated solder ring, which eliminates the need to apply external solder, significantly reducing installation time and effort. However, users must ensure they have a proper heat source, such as a blowtorch, to effectively melt the pre-applied solder for a secure, airtight seal.
| Model Part Number | 1328033 |
|---|---|
| Brand | Prima Plus |
No, the Prima Plus Solder Ring fittings have the necessary solder integrated into the unit.
Yes, this product is WRAS approved, making it safe and compliant for use in potable water supply lines.
Yes, these fittings are suitable for gas installations provided they are installed according to local gas safety regulations.
This specific elbow is designed for standard 15mm copper piping.
They are manufactured to EN 1254 standards and carry the British Standard Kite mark.
Ensure the pipe is cleaned with wire wool and check that the fitting was heated evenly around the entire circumference.
The fitting may have been moved before the solder fully set; disassemble the joint, clean, and re-solder with more consistent heat application.
Avoid overheating the copper; remove the heat source as soon as the solder ring melts into the joint.
To install the 15mm Prima Plus Obtuse Elbow, start by ensuring the copper pipe ends are clean and free of burrs. Apply a small amount of soldering flux to the pipe end before inserting it into the fitting. Using a suitable heat source, heat the fitting evenly until you see the solder begin to flow around the joint. Once cooled, wipe the area with a damp cloth to remove any residual flux, which can be corrosive over time. These fittings are exclusively for copper pipework and must not be used on different materials. Always check local plumbing codes before modifying gas supply lines.
