Lotus Quartz Sleeve - 40w - Green
Best current price£27.99from Pondkeeper
Best offers
Shopping.co.uk recommended and popular offers
Pondkeeper£27.99Visit shop Lotus 40W Quartz Sleeve Sp-Ltqz40w
Visit shopPondkeeper£27.99Visit shop All Offers
3 offers from £27.99 - £31.99
View price history by clicking the chart icon.
Product Information
Full details
The Lotus Quartz Sleeve 40w is an essential replacement component for pond owners maintaining Lotus, Oasis, and AquaTeck UV filtration systems. Designed to protect the UV lamp from water exposure while allowing maximum germicidal light transmission, this part is ideal for those performing routine annual maintenance on their filtration units. While it ensures high-performance water clarity, users must handle the delicate glass with extreme caution during installation to avoid cracks or breakage.
All features
| Colour | Green |
|---|---|
| Model Part Number | SP-LTQZ40W |
| Brand | Lotus |
Extended Product Information
FAQs
How often should I replace the quartz sleeve?
You should replace the sleeve if it becomes cracked, deeply scratched, or if mineral deposits no longer clean off effectively.
Do I need special tools to install this?
No special tools are required, though using silicone grease for the O-rings is highly recommended for a proper seal.
Can I use this with a 55w UV bulb?
No, this sleeve is specifically engineered for 40w UV lamps. Using it with a different wattage may lead to improper fit or failure.
How many sleeves do I need for a Green Genie 60000?
The Lotus Green Genie 60000 requires two of these 40w quartz sleeves for operation.
Is it normal for the glass to get warm?
Yes, quartz sleeves will feel warm during operation due to the heat generated by the UV bulb.
Troubleshooting
Water inside the quartz sleeve
The O-ring is likely damaged or not seated correctly. Inspect the O-ring for cracks, clean the seating surface, and ensure it is lubricated before tightening.
UV lamp is on but water is green
The sleeve may be covered in mineral deposits. Clean the exterior of the quartz sleeve thoroughly to ensure maximum UV light transmission.
Sleeve will not slide into the housing
Check the interior of the housing for debris or calcification and clean the area before attempting to reinsert the sleeve.
Pros and Cons
Pros
- Genuine OEM component for guaranteed compatibility
- Essential for maintaining optimal UV sterilization efficiency
- Robust construction for long-term underwater durability
- Easy to install during standard filter servicing
Cons
- Fragile glass material requires delicate handling
- Requires proper O-ring seating to prevent leakage
- Not compatible with UV units using non-standard wattage lamps
Setup, Compatibility & Care
To install, first ensure the power supply to the UV unit is disconnected. Remove the old sleeve by loosening the compression nut and carefully sliding it out of the filter housing. When inserting the new Lotus Quartz Sleeve, ensure the O-rings are clean and lubricated with silicone grease to create a perfect seal.
Compatibility Note: This sleeve is compatible with Lotus, Oasis, and AquaTeck 40w units. Always check the model number on your filter housing.
Care Instructions: Handle the sleeve by the ends to avoid leaving oils from your fingers on the glass. If the sleeve becomes dirty, clean it with a soft cloth and a mild vinegar solution to remove mineral deposits, then rinse thoroughly before reassembly.