Setup, Compatibility & Care
Installation of the Prima Plus 15 x 8mm coupling requires only basic plumbing tools, such as an adjustable wrench and a pipe cutter.
- Cut the 15mm and 8mm pipes squarely and remove any burrs from the ends.
- Slide the nut and the included olive onto the pipe.
- Insert the pipe firmly into the coupling body until it reaches the stop.
- Tighten the nut by hand until firm, then use an adjustable wrench to tighten further by approximately one-half to three-quarters of a turn.
For care, periodically inspect joints after installation for any signs of moisture. Because these fittings are compression-based, they are generally maintenance-free; however, if the system is ever dismantled, it is recommended to replace the olives to ensure a fresh, secure seal upon reassembly.