Best current price£7.50from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£7.50Visit shop Freefoam White Ogee Fascia Corner Double Ended - 604Mm
Visit shop2 offers from £7.50 - £8.26
View price history by clicking the chart icon.
The Freefoam Ogee Fascia Corner is designed for professional installers and homeowners undertaking roofline renovations who require a clean, aesthetic finish for external eaves. Its primary benefit is providing a seamless, weather-tight transition at 90-degree corners while masking the necessary 10mm expansion gap between fascia boards. A key caveat is that proper installation requires a specific combination of adhesive and low modulus silicone to ensure the material can expand and contract safely through varying seasonal temperatures.
| Model Part Number | FOXX |
|---|---|
| Brand | Freefoam |
This product is specifically designed for the Freefoam Ogee system. Using it with other brands may result in profile mismatches.
No, a standard hacksaw or a fine-toothed hand saw is sufficient for cutting the PVC material.
Low modulus silicone remains flexible, which is critical for allowing the PVC to expand and contract without breaking the seal.
The corner is shaped for standard 90-degree eaves; it may not be suitable for irregular or acute angles.
No, the PVC is designed to be maintenance-free and does not require painting.
This is likely caused by the lack of an expansion gap. Check if the fascia boards were installed with the required 10mm gap behind the trim.
Ensure that the adhesive was applied to the correct 'fixed' side and that the surface was clean and dry before application.
To set up the component, first measure your corner angle and verify that the fascia boards have been installed with the necessary 10mm expansion gap. When attaching the corner, apply PVC adhesive to one side of the joint to anchor the piece firmly. On the opposite side, use low modulus silicone instead of rigid glue; this allows the PVC board to slide slightly during thermal expansion and contraction. Compatibility is limited to Freefoam Ogee profile systems. Maintenance is minimal: simply wipe the surface with a damp cloth and a mild detergent occasionally to remove accumulated dirt or debris.
