A very subtle plaster effect with a light weave to give your room an authentic and stylish feel.
Best current price£1.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£1.00Visit shop B&Q - Italian Textures 4 Beige Plain Texture Wallpaper A4 Sample
Visit shop5 offers from £1.00 - £71.95
View price history by clicking the chart icon.
This Galerie Italian Textures 4 Beige Plain Texture Wallpaper is designed for homeowners seeking to add a subtle, authentic, and stylish feel to their rooms. Its key benefit lies in its understated plaster effect combined with a light weave, offering a sophisticated and timeless aesthetic. A potential consideration is its plain texture, which might be less impactful for those desiring bold statement walls.
| Colour | Beige |
|---|---|
| Brand | Galerie |
It is recommended to use a high-quality, solvent-free wallpaper adhesive suitable for textured or vinyl wallpapers. Always check the product packaging for specific adhesive recommendations or consult with your wallpaper supplier.
Generally, this wallpaper should only be applied over clean, dry, and well-prepared surfaces. Existing wallpaper should be removed, and the wall underneath cleaned and primed before applying the new wallpaper.
The plaster effect and weave are integral to the wallpaper's design and are created using durable materials. However, like all wallpapers, it can be susceptible to damage from sharp objects or excessive abrasion.
This wallpaper is generally wipeable with a slightly damp cloth for minor marks. It is not considered fully washable, so avoid scrubbing or using harsh cleaning agents.
Typically, this type of wallpaper can be stripped easily, often coming off in large pieces. Start at a corner and peel away. If residue remains, use a wallpaper stripper solution or steam cleaner as per their instructions.
The beige color is designed to be neutral, but depending on lighting conditions, it may have subtle warm or cool undertones. It's advisable to obtain a sample to see it in your room's lighting.
Measure the height and width of each wall in your room and calculate the total square footage. Divide this by the square footage covered by one roll of wallpaper, accounting for pattern repeat and waste (typically 10-15%). It's always best to buy slightly more than you calculate to ensure consistency and account for mistakes.
Ensure the wall is properly prepared and adhesive is applied evenly. Gently smooth out bubbles towards the edge with a wallpaper brush or smoother before the adhesive dries. If dried, small bubbles may be pricked with a fine needle and smoothed down.
Verify that each strip is hung straight and aligned correctly with the previous one. Ensure you are following the recommended overlap or butt-joint guidelines if specified by the manufacturer. Trim edges precisely if necessary.
Check if the edges were properly sealed with adhesive. Apply a small amount of wallpaper adhesive to the back of the peeling edge and press firmly back into place. Use a seam roller for a secure bond.
Use a very sharp, fresh utility blade or craft knife. Make clean, decisive cuts rather than sawing motions. Ensure the wallpaper is firmly pressed against the surface being cut.
Setup: This wallpaper is typically designed for paste-the-wall application, meaning adhesive is applied directly to the wall. Ensure the wall surface is clean, dry, smooth, and free from dust or imperfections before application. Use a suitable wallpaper adhesive recommended for this type of material. Trim edges carefully with a sharp blade.
Compatibility: Suitable for use on most interior walls, including plaster, drywall, and previously papered surfaces (after removal of old paper and preparation).
Care: To maintain its appearance, gently dust the wallpaper regularly with a soft brush or cloth. For minor marks, a slightly damp (not wet) sponge can be used carefully. Avoid abrasive cleaners or excessive moisture, which could damage the texture or adhesive.
