Iron On Pre Glued White Worktop Edging Tape - 5M L x 18mm W - B&Q

You'll need an iron or heat gun, a clean cloth, a sharp knife or edge trimmer, and a measuring tape.

The tape is designed for straight edges. Using it on curves may prove challenging.

Apply heat to soften the adhesive and carefully peel off the tape. Use a solvent to remove any remaining adhesive residue.

An iron or a heat gun are recommended. Set the heat to a medium setting to avoid damaging the tape or worktop.

Apply heat evenly until the adhesive melts and bonds to the worktop edge. The exact time will vary based on the heat source.

The tape's finish is usually intended to be the final aesthetic. Painting the tape is not recommended as it may affect adhesion and durability.

Additional rolls of B&Q Iron On Pre Glued White Worktop Edging Tape can be purchased to complete the project.

Ensure the worktop edge is clean and dry. Apply sufficient heat and pressure during application. Use a stronger adhesive if required.

Re-apply heat and smooth the tape with a clean cloth, removing any trapped air bubbles.

Ensure the corners are trimmed neatly. Apply extra heat and pressure to the corners.