FloPlast Tap Connector - 15mm x 1/2"
Best current price£1.61from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£1.61Visit shop Floplast Flofit+ Fbc1512 15Mmx1/2" Tap Connector 2496001338
Visit shopCity Plumbing GB£1.61Visit shop All Offers
2 offers from £1.61 - £3.88
View price history by clicking the chart icon.
City Plumbing GBFloplast Flofit+ Fbc1512 15Mmx1/2" Tap Connector 2496001338
Free delivery in 1–3 days
£1.61
Visit shop
Professional Building SuppliesFloplast Floplastflofit+ Push Fit Bent Tap Connector - 15Mm X 1/2Andquot;
Free delivery in 1–3 days
£3.88
Visit shop
Product Information
Full details
This guide is for plumbers and DIY enthusiasts working with domestic water systems. The FloPlast Flofit+ Tap Connector provides a reliable, demountable, and reusable connection between 15mm plastic push-fit pipe and a 1/2" tap, offering long-term durability with a 50-year guarantee. Its primary caveat is the need for a clean, square pipe cut for a secure push-fit connection.
All features
| Model Part Number | FBC1512 |
|---|---|
| Brand | FloPlast |
Extended Product Information
FAQs
What is the main advantage of Flofit+ fittings?
The main advantage is their demountable and reusable nature, combined with a long-term guarantee and suitability for various water systems.
Can this connector be used with copper pipe?
No, this specific connector is designed for use with 15mm plastic push-fit pipe only.
What tools are needed for installation?
For standard installation, no special tools are required. A pipe cutter for a square cut and a disconnect tool for removal are recommended accessories.
How long will this tap connector last?
The FloPlast Flofit+ FBC1512 comes with a 50-year manufacturer's guarantee, indicating a very long expected lifespan under normal operating conditions.
Is this connector suitable for underfloor heating?
Yes, Flofit+ fittings are suitable for use in central heating systems.
What does the 90-degree angle achieve?
The 90-degree angle allows the plastic pipe to connect to the tap from a different direction than the tap's orientation, providing flexibility in pipe routing, especially in confined spaces.
Can I use this connector in areas with very hard water?
Yes, the Flofit+ range is suitable for use in both hard and soft water areas.
Troubleshooting
Connector leaks at the 15mm pipe connection.
Ensure the pipe was cut square and is free from burrs. Push the pipe in further to ensure it's fully seated. If the issue persists, the pipe end may be damaged, and a fresh cut may be required.
Connector leaks at the 1/2" tap connection.
Check that the tap thread is clean and undamaged. Ensure the connector is screwed on straight and not cross-threaded. Tighten slightly, but avoid overtightening, which can damage the plastic threads.
Pipe is difficult to insert into the connector.
Confirm the pipe is the correct size (15mm) and that the end is clean and free from damage. Ensure the connector's internal gripping mechanism is not obstructed.
Connector will not demount.
Use the correct disconnect tool. Ensure the tool is fully inserted around the pipe before attempting to pull the pipe and tool away from the connector body.
Pros and Cons
Pros
- High durability with a 50-year guarantee.
- Easy and quick installation without specialized tools.
- Reusable, reducing waste and cost over time.
- Versatile for various water systems and types.
- Compact 90-degree design saves space and allows flexible routing.
Cons
- Requires a perfectly square and clean pipe cut for a secure seal.
- Plastic material may be perceived as less robust than metal fittings by some users.
- Limited to 15mm pipe and 1/2" tap connections; not universally applicable.
- Potential for leaks if installation instructions are not precisely followed.
Setup, Compatibility & Care
Setup:
- Ensure the end of the 15mm plastic pipe is cut perfectly square and clean. Any burrs or debris can prevent a proper seal.
- Remove any protective cap from the 15mm push-fit end.
- Push the 15mm pipe firmly and squarely into the push-fit socket until it stops. You should feel it seat securely.
- Connect the 1/2" threaded end to the corresponding tap outlet, tightening by hand initially and then a quarter-turn with a wrench if necessary, being careful not to overtighten.
Compatibility:
- Designed for use with 15mm plastic push-fit pipe.
- Compatible with 1/2" BSP threaded tap outlets.
- Suitable for drinking water, central heating systems, and both hard and soft water areas.
Care:
- No specific maintenance is required for the connector itself. Ensure surrounding pipework and connections are periodically checked for leaks.
- If disconnection is needed, use a FloPlast disconnect tool (or similar approved tool) to release the pipe grip before pulling the pipe out.