Bell Wire / Speaker Cable - 100M - White

CCA stands for Copper Clad Aluminium. It is a conductor where an outer layer of copper is bonded to an aluminium core. It offers good conductivity and is lighter and less expensive than pure copper.

The cable is rated for a maximum of 1 Amp.

This cable is intended for low-wattage speaker systems. For most home stereo systems that require higher power output, a thicker gauge pure copper cable is recommended to avoid signal loss and potential overheating.

The white color is standard for insulation. While it can be wiped clean, it may show dirt or scuffs more readily than darker colors in certain environments. Proper installation and protection will help maintain its appearance.

It means one of the conductors within the cable is marked in a way (often by color or text) that helps you distinguish it from the other. This is crucial for devices where correct polarity is important for operation, such as some electronic circuits.

This specific product listing is for a 100m length. Other lengths such as 25m and 50m may be available separately.

The cable's insulation provides basic protection, but it is not specifically rated for direct burial or prolonged exposure to harsh outdoor elements. It is best suited for indoor runs or protected outdoor installations.

Check that both ends of the cable are securely connected to the terminals. Verify polarity markings are correctly aligned. Ensure the device itself is functioning and powered correctly. Test continuity of the cable with a multimeter if possible.

Ensure the cable is not damaged or pinched. Check for loose connections. If the cable run is very long, consider if signal degradation due to length or CCA material is a factor for your specific application, and ensure you are within the 1 Amp limit.

Use a quality wire stripper designed for the appropriate gauge. Ensure the stripping tool is sharp. Be careful not to cut into the CCA core beneath the insulation.