Washer Pump - Quinton Hazell - QWP094

This pump is designed to be compatible with various Ford and Volvo models that use specific OEM part numbers such as FORD (1231599, 1357105, 1S7117K624DC, 1S7117K624DD) and VOLVO (30663138, 30699953, 3134923). Always verify fitment using a vehicle-specific tool or by comparing part numbers.

The Quinton Hazell QWP094 washer pump operates on a standard 12V electrical system.

This washer pump features a 2-pin electrical connector.

While primarily designed as a washer fluid pump for vehicles, its function as a small fluid pump could potentially be adapted for other low-voltage fluid transfer tasks, though this is not its intended use.

A mono pump, in this context, refers to a single-stage pump, meaning it has one impeller or motor to move the fluid, designed for straightforward delivery of washer fluid.

The washer pump is usually located at the bottom of the windshield washer fluid reservoir, which is typically found in the engine bay.

Check that the washer fluid reservoir is full. Verify the electrical connection to the pump is secure and that there is 12V power at the connector when the washer switch is activated. Inspect the fluid lines for kinks or blockages. If these are clear, the pump may be faulty and require replacement.

Ensure the fluid lines are securely attached to the pump outlets. Check the seals on the pump where it mounts into the reservoir for damage or wear. If the pump housing itself is cracked, it will need to be replaced.

Check for blockages in the washer fluid lines or at the spray nozzles. Ensure the washer fluid reservoir is full. If lines and nozzles are clear, the pump may be losing pressure due to internal wear or a faulty seal.