Primrose Rear Supply Corten Steel Waterfall Blade Cascade 60cm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Primrose Corten Steel Waterfall Blade Cascade is designed for garden enthusiasts seeking to add a modern, sophisticated water feature. Its key benefit is the instant waterfall effect with a unique, weather-resistant corten steel finish. A potential caveat is the need for an existing pond or the creation of a new one for installation. This feature transforms outdoor spaces with a contemporary aesthetic and durable material.
All features
| Brand | Primrose |
|---|
Extended Product Information
FAQs
Do I need a pump and tubing?
Yes, a submersible water pump and appropriate tubing are required to operate the waterfall blade cascade. These are typically sold separately.
What size pump do I need?
For a 60cm blade, a pump with a flow rate of approximately 4000-8000 liters per hour is generally recommended to achieve a full, even cascade. Always check the specific recommendations for the blade and your desired effect.
How does the corten steel develop its appearance?
Corten steel develops a protective, rust-like patina over time when exposed to the elements. This is a natural process and is integral to the material's durability and aesthetic.
Can this be installed without a pond?
Yes, it can be installed in any suitable water-recirculating system, such as a dedicated water basin or reservoir, as long as there is a place for the water to fall back into.
How do I clean the corten steel blade?
Use a soft cloth or sponge with water. Avoid harsh chemicals or abrasive scrubbers, as they can damage the protective patina.
Is the 'rust' finish permanent?
The characteristic rust-like appearance is a stable patina that forms over time and protects the steel. It is a durable finish.
Troubleshooting
Water flow is uneven or weak.
Check the pump's flow rate; ensure it is adequate for the 60cm blade. Clean the blade's edge and inlet for blockages. Verify the water tubing is not kinked or obstructed.
No water is flowing.
Confirm the pump is plugged in and submerged correctly. Check the power supply to the pump. Ensure the water reservoir has sufficient water level.
Visible rust run-off staining surrounding areas.
This is normal for new corten steel. Allow the patina to stabilize. Consider installing a barrier or flushing the area thoroughly after initial setup.
Pump is making unusual noise.
Check if the pump intake is clear of debris. Ensure the pump is fully submerged. Refer to the pump's specific troubleshooting guide.
Pros and Cons
Pros
- Unique and sophisticated corten steel finish.
- Durable and weather-resistant material.
- Creates an instant, elegant waterfall effect.
- Relatively easy to install.
- Adds a contemporary touch to garden designs.
Cons
- Requires an existing pond or a new water feature setup.
- Corten steel may have a slight initial rust run-off.
- Water pump and tubing not typically included (check product details).
- May require occasional cleaning to maintain water flow.
Setup, Compatibility & Care
Setup:
- Position the blade cascade at the desired location, typically at the edge of a pond or water feature.
- Connect the appropriate water tubing (not included) to the rear supply inlet.
- Connect the tubing to a suitable submersible water pump (not included) placed within your pond or water reservoir.
- Ensure the pump is adequately submerged and positioned to draw water efficiently.
- Test the flow and adjust the blade's position for optimal water sheeting.
Compatibility:
- Compatible with most submersible water pumps. Ensure the pump's flow rate (liters per hour) is sufficient for the 60cm blade width to achieve a full cascade effect. Consult pump manufacturer recommendations.
- Requires a water reservoir such as a pond, reservoir tank, or basin.
Care:
- Cleaning: Periodically clean the blade surface and inlet to prevent debris buildup that could obstruct water flow. A soft brush and water are usually sufficient.
- Winterizing: In freezing climates, it is recommended to remove the pump and blade from the water and store them in a frost-free location during winter to prevent damage.
- Corten Steel Patina: The 'rust' finish is a protective patina. Avoid abrasive cleaners that could damage this layer. Initial run-off from new corten steel might stain adjacent materials; consider this during installation.