Best current price£1.66from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£1.66Visit shop Primaflow Men's Endfeed Iron Adaptor - 15Mm X 1/2Andquot;
Visit shop
The Range£4.38Visit shop Prima Plus Primaplus Endfeed Adaptor 15Mm X 3/8" Male - 30018605 - Grey
Visit shop33 offers from £1.66 - £16.58
View price history by clicking the chart icon.
The Primaflow Endfeed Adaptor is designed for professional plumbers and experienced DIY enthusiasts who require a robust, permanent connection between copper pipework and threaded components in water or gas systems. This premium fitting offers exceptional reliability and compliance with stringent safety standards, making it ideal for high-quality installations; however, it requires proficiency in soldering techniques to ensure a leak-free seal.
| Brand | Primaflow |
|---|
Yes, the Primaflow Endfeed Adaptor is designed to handle the pressures and temperatures typical of domestic water and heating systems.
No, the male iron thread is designed to be sealed using plumber's tape or a suitable thread sealant compound.
No, this is an endfeed copper fitting specifically designed for use with copper tubing.
They are manufactured to EN 1254 standards and carry the British Kite mark.
Yes, the product is WRAS approved, meaning it is certified for use in systems supplying drinking water.
Clean and re-flux the joint, then reheat and re-apply a small amount of solder to ensure the capillary gap is fully filled.
Verify that the pipe and fitting are clean and free of oils; ensure enough heat is applied to the fitting socket to melt the solder upon contact.
Unscrew the threaded side, re-apply a fresh layer of PTFE tape in the direction of the thread, and tighten to the appropriate torque.
To install the adaptor, ensure the copper pipe end is clean, deburred, and free of oxidation using emery cloth. Apply an appropriate plumbing flux to the exterior of the pipe and the interior of the fitting socket. Assemble the joint and apply heat evenly using a blowtorch until the solder flows into the joint via capillary action. Allow the connection to cool naturally; do not quench it in water. For the male iron thread, use PTFE tape or a compatible liquid pipe sealant to ensure a watertight seal when connecting to the 3/8" female component. Always pressure test the system before finalizing the installation or closing up walls.
