Shopping.co.uk

Hose Clamp - 9 Pack - 40mm to 60mm - 9mm Band Width

Hose Clamp - 9 Pack - 40mm to 60mm - 9mm Band Width

Secure your hoses with confidence using these premium hose clips. Designed to provide a tight and ...

Best current price£7.37from B&Q

Best offers

Shopping.co.uk recommended and popular offers

All Offers

10 offers from £7.37 - £8.42

View price history by clicking the chart icon.

B&Q - 2 Pack A2 Stainless Steel Hose Clamps 40mm To 60mm 9mm Band Width
Free delivery in 1–3 days
£7.37
Visit shop

Product Information

Full details

The B&Q 40mm-60mm Hose Clips are designed for DIY enthusiasts and professionals seeking a reliable, leak-proof seal for hoses in automotive, domestic, and industrial settings. These 9mm wide clamps provide superior structural integrity and corrosion resistance, ensuring a long-lasting connection under pressure. While they are highly durable, users should ensure the clamp range matches their specific hose diameter exactly to prevent overtightening or slippage.

All features

Model Part NumberA24060-009
BrandB&Q

Extended Product Information

FAQs

Are these hose clips suitable for fuel lines?

Yes, they are suitable for general automotive use, but always ensure the size range is correct for your specific fuel hose diameter.

Can these be used outdoors?

Yes, their corrosion-resistant construction makes them suitable for outdoor applications like garden pumps or irrigation systems.

How do I know if the clamp is tight enough?

The clamp is tight enough when the hose is firm on the fitting and cannot be pulled off by hand. Avoid tightening until the band distorts.

What tools do I need for installation?

A standard flat-head or Phillips-head screwdriver is required to operate the worm-drive screw.

Can these be reused?

Yes, these clamps are designed to be loosened and reused multiple times provided the threads and band remain undamaged.

Troubleshooting

Clamp will not tighten fully

Ensure the hose diameter is within the 40mm-60mm range and check for debris in the screw thread.

The clamp slips off the hose

Verify that the hose is pushed fully onto the fitting and that the clamp is positioned behind the raised ridge of the fitting.

Visible signs of rust

While highly resistant, if exposed to harsh chemicals, rinse with fresh water and dry, or replace if the screw mechanism becomes seized.

Pros and Cons

Pros

  • High corrosion and rust resistance
  • Reliable, tight seal for various applications
  • Manufactured to strict ISO9001 quality standards
  • Versatile for industrial, automotive, and home use

Cons

  • Fixed size range may not suit smaller or larger tubing
  • Requires manual adjustment with a screwdriver
  • Not intended for extreme high-pressure hydraulic systems

Setup, Compatibility & Care

To install, slide the clamp over the hose before attaching the hose to the fitting. Once the hose is seated on the spigot, slide the clamp into position—ideally about 5-10mm from the end of the hose. Use a compatible flat-head or cross-head screwdriver to tighten the screw mechanism. Do not overtighten, as this can damage the clamp threads or the hose itself. For maintenance, periodically inspect the clamp for signs of environmental wear or loose fittings, especially in outdoor or vibrating automotive engine bay environments.

Price History

DatePrice
Visit shop