Wall Flange Kit - 20mm MDPE - Geka and Lever Valve

MDPE stands for Medium-Density Polyethylene, a durable and flexible plastic commonly used for water distribution pipes.

Yes, PTFE tape (also known as plumber's tape or Teflon tape) is recommended for all threaded BSP connections to ensure a watertight seal. It is not included in this kit.

This kit is primarily designed for cold water supply and irrigation. The components may not be rated for sustained high temperatures associated with hot water systems.

BSP stands for British Standard Pipe. It refers to a set of standardized pipe threads used in plumbing.

To disconnect, simply pull back the outer sleeve of the Geka connector and twist to release the connection.

The Geka fitting's main advantage is its speed and ease of use, allowing for quick, tool-free connections and disconnections that are both secure and watertight.

Yes, the MDPE flange and brass fittings are suitable for permanent water supply installations, provided they are installed correctly according to plumbing best practices.

Ensure PTFE tape was applied to the male threads before tightening. If already installed, turn off the water supply, disconnect, apply PTFE tape, and reconnect securely.

Check the Geka claw mechanism for debris or damage. Ensure the rubber seal is seated correctly and clean. Apply a small amount of silicone lubricant to the seal if necessary.

Confirm the butterfly valve is fully open. Check the MDPE pipe for kinks or blockages and ensure the Geka connection is not restricted.

Ensure the pipe is cut cleanly and inserted fully into the fitting. Re-tighten the compression nut. If the issue persists, the pipe or fitting may be damaged and require replacement.