Setup, Compatibility & Care Instructions
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and loose paint. Lightly sand glossy or previously painted surfaces to improve adhesion. For bare wood or metal, apply an appropriate primer.
Application: Stir the paint thoroughly before use. Apply with a good quality brush or roller. Two coats are recommended for best results, allowing adequate drying time between coats. Avoid applying in excessively damp, cold, or hot conditions.
Compatibility: Suitable for interior and exterior woodwork, metalwork, pipework, kitchen cabinets, trim, interior/exterior doors, and windowsills.
Care: Once fully cured, surfaces painted with Vintro Gloss can be cleaned using a soft, damp cloth and mild detergent. Avoid abrasive cleaners or harsh scrubbing, which can damage the finish.