Simply Chosen 4u Self-Adhesive Furniture Film - Brown
Best current price£17.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£17.99Visit shop B&Q - Self-Adhesive Furniture Film Dark Oak 500X90 Cm Pvc
Visit shopB&Q£17.99Visit shop All Offers
2 offers from £17.99
View price history by clicking the chart icon.
B&QB&Q - Self-Adhesive Furniture Film Dark Oak 500X90 Cm Pvc
Free delivery in 1–3 days
£17.99
Visit shop
OnBuy.comVidaxl Self-Adhesive Furniture Film Dark Oak 500X90cm Pvc Wall Paper Door Film 8719883804774
Free delivery in 1–3 days
£17.99
Visit shop
Product Information
Full details
The Simply Chosen 4u Self-Adhesive Furniture Film in Brown is an ideal solution for DIY enthusiasts and homeowners looking to revitalize worn furniture or update interior surfaces without the high cost of replacement. This film offers a realistic wood-look grain that adds warmth and texture to flat surfaces, providing a budget-friendly way to achieve a professional-looking wood finish. Users should be aware that achieving a seamless, bubble-free result requires patience and careful surface preparation, especially when wrapping edges or corners.
All features
| Colour | Brown |
|---|---|
| Model Part Number | 146117 |
| Brand | Simply Chosen 4u |
Extended Product Information
FAQs
Can this be used on bathroom cabinets?
While it is water-resistant, it is not waterproof. It is best used in low-humidity environments.
Does the film leave residue if removed?
Typically, the film leaves minimal residue, which can usually be removed with a gentle adhesive remover or rubbing alcohol.
Can I use this on a painted wall?
It is not recommended, as the adhesive may peel off the paint when the film is eventually removed.
Is the grain texture raised or flat?
The film features a realistic printed grain; the surface is generally smooth to the touch.
Can I overlap the film if the furniture is wider than the roll?
Yes, but for the best look, overlap at a natural seam or edge of the furniture piece.
Troubleshooting
Air bubbles trapped under the film
Use a small needle to prick the bubble gently and smooth the air out towards the hole.
The film is peeling at the edges
Re-activate the adhesive by applying low heat with a hairdryer and pressing firmly until it cools.
Film won't stick to the surface
The surface likely has residue or dust; clean it thoroughly with a degreaser or alcohol and reapply.
Pros and Cons
Pros
- Cost-effective alternative to purchasing new wooden furniture
- Easy to clean with a damp cloth
- Applicable to various flat, smooth surfaces
- Provides an instant aesthetic upgrade
Cons
- Requires precision for corner and edge wrapping
- Not suitable for textured or porous surfaces like raw wood or fabric
- Air bubbles can form if not applied slowly
- May be difficult to remove if left on for many years
Setup, Compatibility & Care
To prepare your furniture, remove any hardware like handles or knobs before applying the film. Ensure your surface is dry and smooth; any bumps or debris will show through the film once applied.
Compatibility: This film is compatible with laminate, plastic, metal, and glass surfaces. It is not recommended for outdoor use or areas with extreme heat, such as directly next to a fireplace or stove.
Care: Clean the film regularly with a soft, damp cloth and mild soap. Avoid using abrasive sponges or harsh chemical cleaners, as these can scratch the film or degrade the adhesive over time.