Pegler VSH Tectite Classic Push-Fit Stop End - 15mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Pegler VSH Tectite Classic Push-Fit Stop End is designed for plumbers and DIY enthusiasts needing to cap off 15mm copper pipe ends. Its primary benefit is the demountable push-fit design, allowing for rapid and simple installation without the need for special tools, saving significant time on job sites. A key consideration is that it's specifically for copper tube manufactured to BS EN 1057.
All features
| Model Part Number | 45866 |
|---|---|
| Brand | Pegler |
Extended Product Information
FAQs
What type of pipe does the VSH Tectite Classic fitting work with?
This fitting is specifically designed for 15mm copper tubes manufactured to BS EN 1057 standards. It works with both plain and chrome-plated copper pipes.
Does this fitting require any special tools to install?
No, the VSH Tectite Classic fittings are demountable push-fit fittings and do not require any special tools for installation. A simple push action creates the seal.
What is the guarantee period for this fitting?
The VSH Tectite Classic fittings come with a 25-year guarantee, provided they are used in conformity with the specified standards.
Is this fitting approved for drinking water systems?
Yes, the VSH Tectite Classic fittings are WRAS approved, meaning they meet the stringent requirements for use in public water supplies in the UK.
Can I use this fitting on plastic pipes?
No, this fitting is exclusively designed for use with copper tubes manufactured to BS EN 1057. It is not compatible with plastic piping systems.
How do I remove the fitting if I need to make a change?
The fitting is demountable. You can use the specific Pegler Tectite demounting tool to release the grip and remove the fitting from the pipe. Ensure the pipe end is clean and undamaged for re-installation.
What does 'WRAS approved' mean?
WRAS approval signifies that the product has been rigorously tested and complies with the Water Supply (Water Fittings) Regulations 1999 in the UK, ensuring it is safe for use with drinking water.
Troubleshooting
Fitting does not seal properly
Ensure the copper pipe is clean, dry, and cut squarely. Check for any burrs or damage on the pipe end. Verify the pipe is pushed in fully to the correct depth. Confirm the pipe is manufactured to BS EN 1057.
Difficulty pushing fitting onto pipe
Ensure the pipe end is smooth and free of burrs. Slightly rotating the fitting during insertion can help. Check if the pipe is properly deburred and chamfered.
Leak after installation
Check if the pipe was inserted fully to the correct depth. Inspect the pipe end for damage or imperfections that prevent a good seal. Re-demount and re-install, ensuring the pipe end is clean and undamaged.
Fitting cannot be demounted
Use the correct Pegler Tectite demounting tool. Ensure the tool is correctly positioned around the pipe and engages with the release mechanism. Avoid forcing the tool; it should slide on smoothly.
Pros and Cons
Pros
- Extremely fast installation saves labor time.
- No special tools required for fitting.
- Demountable feature allows for easy adjustments or removal.
- High level of confidence due to WRAS approval and long guarantee.
- Suitable for both plain and chrome-plated copper pipes.
Cons
- Limited to 15mm copper pipe applications.
- Requires adherence to specific pipe standards (BS EN 1057).
- May be more costly upfront compared to traditional compression fittings.
- Long-term performance depends on correct installation practices.
Setup, Compatibility & Care
Setup:
- Ensure the end of the 15mm copper pipe (manufactured to BS EN 1057) is clean, dry, and free from damage or burrs.
- Mark the insertion depth on the pipe using the tool provided or a measuring tape.
- Push the fitting firmly onto the pipe until it reaches the insertion mark.
- The fitting creates an instant, secure seal.
Compatibility:
- This fitting is exclusively designed for 15mm copper tubes manufactured according to BS EN 1057 standards.
- It is suitable for use with both plain (uncoated) and chrome-plated copper pipes meeting the specified standard.
Care:
- Store fittings in a clean, dry environment to prevent contamination.
- Avoid exposing the fitting to excessive heat or corrosive substances.
- If demounting, ensure the pipe end is clean and undamaged before reinsertion. Use the appropriate Tectite tool for demounting.