Best current price£41.11from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£41.11Visit shop Yonico Bullnose Beading Router Bits 14Inch Bead 14Inch Shank 13191Q 765573833812
Visit shop1 offer from £41.11
View price history by clicking the chart icon.
This guide is for woodworkers seeking to add decorative bullnose bead edges to furniture and projects. The Yonico Bullnose Beading Router Bit 13191q offers a precise 1/8" radius bead cut with a 1/4" shank, ideal for adding a professional touch to shelves, tabletops, and cabinetry. While it provides a clean, durable cut thanks to its carbide blades, users should ensure their router is suitable for bits with a 1/4" shank and be mindful of feed rate for optimal results.
| Model Part Number | 13191q |
|---|---|
| Brand | YONICO |
The Yonico Bullnose Beading Router Bit 13191q features premium C3 micro-grain tungsten carbide cutters for durability and a sharp cutting edge.
This specific bit, model 13191q, creates a 1/8" radius bullnose bead.
No, this bit has a 1/4" shank and is designed for routers equipped with a 1/4" collet. You may need an adapter if your router only accepts 1/2" shanks.
This bit is effective on most hardwoods and softwoods, including pine, oak, maple, and plywood. For best results, use appropriate feed rates and depths of cut.
Clean the bit after each use to remove wood debris. Sharpening carbide bits requires specialized equipment; typically, replacement is more common than resharpening for most users.
No, this bit is specifically designed for creating decorative bullnose bead profiles on edges and is not intended for cutting joinery.
Silver induction brazing creates a stronger, more durable bond between the carbide cutter and the bit body, enhancing overall strength and longevity under heavy use.
Ensure the bit is sharp (check for dullness or damage), reduce the depth of cut per pass, and verify the router speed is appropriate for the material being cut. Check that the bit is spinning in the correct direction.
Make sure the bit is securely and fully seated in the collet. Check for any damage or imbalance on the bit itself. Ensure the router's motor brushes are in good condition.
Clean the bit thoroughly after each use with a brush and, if necessary, a mild solvent. Avoid letting resin or wood dust accumulate, as it can affect cutting performance.
Verify that your router has a 1/4" collet installed. If your router only accepts 1/2" shank bits, you will need an adapter or a different bit with a 1/2" shank.
Setup:
Compatibility:
Care:
