Spring Wire Clips - Greenhouse Fittings - 50

The clips are designed to accommodate glass panels between 3mm and 6mm thick. The 'W' shape provides the mechanism for holding this range of thickness securely.

No, these clips are specifically designed for glass within the 3mm to 6mm thickness range. Using them with glass outside this range may result in a poor fit or failure to secure the glass.

They are made from durable galvanised steel, which offers good resistance to rust and corrosion.

For optimal security, it is generally recommended to space the clips approximately every 15-30cm along the edges of the glass pane.

While designed for greenhouses, their galvanised steel construction makes them suitable for any application where glass needs to be secured in a frame and is exposed to elements, provided the frame is compatible.

Yes, similar clips are available in other pack sizes, such as 25, 100, and 1000 units, to suit various project needs.

Verify that the glass thickness is within the 3-6mm range. Ensure the clips are correctly seated in both the glass rebate and the frame channel. You may need to use more clips or adjust their spacing.

Ensure the frame channel is clean and free from obstructions. Gently tap the clip into place with a rubber mallet if needed. If the frame channel is too narrow for the clip, these may not be the correct fitting for your frame.

While galvanised steel is rust-resistant, prolonged exposure to harsh conditions can eventually lead to surface rust. This typically does not compromise structural integrity. For aesthetic purposes, you can clean with a wire brush and apply a suitable metal paint if desired.