Best current price£9.10from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.10Visit shop B&Q - 1-Way Rotary Fan Regulator Dimmer 40-250WReplacement Module Mtr250Fan
Visit shop3 offers from £9.10 - £14.12
View price history by clicking the chart icon.
This Varilight Rotary Fan Regulator Dimmer Module (MTR250FAN_AMZ) is designed for homeowners and electricians seeking to replace existing dimmer modules or integrate advanced fan speed control into the Varilight Matrix grid system. Its primary benefit is providing precise, V-Dim technology-driven fan speed regulation. A key consideration is that it is not compatible with wire-wound low voltage transformers or fluorescent lighting.
| Model Part Number | MTR250FAN_AMZ |
|---|---|
| Brand | Varilight |
This module is specifically designed as a rotary fan regulator replacement dimmer module for controlling fan speeds. It is not intended for dimming standard lighting loads.
The module has a load capacity of 40-250W, suitable for controlling most standard fan motors.
This module is not suitable for wire-wound low voltage transformers or fluorescent lighting.
Fan speed is adjusted using a simple and intuitive rotary dial on the front of the module.
The Varilight Rotary Fan Regulator Dimmer Module comes with a 10-year Varilight Guarantee.
This module is designed for 1-way switching applications only.
The dimensions are approximately 53mm x 25mm x 38mm.
Check that the power supply is connected and switched on. Verify that the wiring is correct according to the installation guide and that the fan is within the specified load capacity (40-250W).
Ensure the fan motor is compatible with dimmer control and check that the module is not overloaded. Verify correct installation and that no wires are loose.
This module is designed for fan speed regulation, not light dimming. If used with a light, ensure it is a dimmable load and within the specified wattage. For fan applications, ensure the fan motor is compatible with this type of speed control. Check for loose connections.
Confirm that the module is intended for your existing faceplate type. This module is designed for specific Varilight systems or standard dimmer replacements. If using the Matrix grid system, ensure you have the correct grid plates.
Setup:
This module is designed to replace existing dimmer modules or integrate into a Varilight Matrix grid system. Ensure the power is switched off at the mains before attempting any installation. Follow the wiring diagram provided with the product carefully, paying attention to live and load connections.
Compatibility:
Care:
To clean the module, first isolate the power supply. Wipe the faceplate and rotary control with a dry or slightly damp, soft cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.
