Erica Synths Black Mute Mixer
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Erica Synths Black Mute Mixer is designed for Eurorack users seeking precise control over their audio signal paths. Its key benefit is the individual mute switch on each input, allowing for selective silencing of audio sources within a mix, plus three buffered outputs for signal splitting. A potential caveat is its compact 6HP size, which might require careful module placement in larger setups.
All features
| Model Part Number | Black Mute Mixer |
|---|---|
| Brand | Erica Synths |
Extended Product Information
FAQs
How many inputs does the Black Mute Mixer have?
The Erica Synths Black Mute Mixer has three AC-coupled inputs.
What is the main advantage over the standard Black Mixer?
The Black Mute Mixer features individual mute switches for each input, allowing you to silence specific audio sources independently.
How many outputs are available?
There are three buffered outputs on the Black Mute Mixer.
What is the power consumption?
The module consumes +8mA on the +12V rail and -8mA on the -12V rail.
What is the physical size of the module?
The module has a width of 6HP and a depth of 25mm.
Can I use this mixer with line-level audio signals?
While designed for Eurorack levels (-10V to +10V), you can interface line-level signals with appropriate attenuators or gain staging, but it's optimized for modular signal levels.
Are the outputs stereo?
No, the three outputs are mono and buffered, suitable for sending the mixed signal to different destinations or for parallel processing.
Troubleshooting
No audio output
Verify that the module is correctly powered by the Eurorack power supply. Check that audio sources are properly connected to the inputs and that the mute switches are disengaged. Ensure output cables are securely connected to the desired destination.
Audio signal is distorted or clipping
The max input level is -10V to +10V. Ensure your input signals are within this range. If using very hot signals, consider using an attenuator before the mixer input or reducing the output level of the source module.
Mute switch is not functioning
Check for any physical obstruction or damage to the switch. If the issue persists, it may indicate an internal component failure requiring professional repair.
Only one output is working
Test each output individually by patching them to a known working module or output. Ensure the cables are not faulty and connections are firm. If one output consistently fails, contact support.
Pros and Cons
Pros
- Provides individual mute control per input for flexible signal management.
- Multiple buffered outputs allow for versatile signal routing and parallel processing.
- Compact 6HP design is space-efficient in Eurorack systems.
- Includes input and output protection for added module safety.
- High-quality audio path ensures sound integrity.
Cons
- Only three inputs may be limiting for complex mixes.
- Requires a Eurorack power supply and case.
- No level controls per input, relying on external gain staging.
Setup, Compatibility & Care
Setup:
The Erica Synths Black Mute Mixer is a Eurorack module and requires a compatible Eurorack case with a power supply. Connect the module to your case's power distribution using a standard Eurorack power ribbon cable, ensuring the red stripe on the cable aligns with the -12V (or GND) connector on both the module and the power supply. Connect your audio sources to the 'Input' jacks and your subsequent processing or output modules to the 'Output' jacks.
Compatibility:
This module is compatible with all standard Eurorack systems (3U height). It accepts audio signals within the range of -10V to +10V. Its 6HP width ensures compatibility with most Eurorack cases.
Care:
- Keep the module clean and free from dust. Use a dry, soft cloth for cleaning.
- Avoid exposure to excessive moisture or extreme temperatures.
- Ensure all connections are secure before powering on the system.
- Handle with care to avoid damage to jacks or components.