Best current price£69.99from My Motor World
Shopping.co.uk recommended and popular offers
My Motor World£69.99Visit shop In Phase Xt-6 800W Peak Power Kevlar Cone 2 Ohm Dual Voice Coil 6" Subwoofer
Visit shop2 offers from £69.99
View price history by clicking the chart icon.
The In Phase XT-6 is designed for car audio enthusiasts who want to significantly upgrade their low-frequency output without sacrificing interior space. Its primary benefit is a high-performance Kevlar cone that produces tight, accurate bass in a compact 6.5-inch form factor, though users should be aware that it requires a properly matched amplifier to reach its 250W RMS potential.
| Model Part Number | XT-6 |
|---|---|
| Brand | In Phase |
While it depends on your specific vehicle, a sealed enclosure typically provides the tightest, most accurate bass response for this 6.5-inch driver.
Yes, by wiring the dual 2-ohm voice coils in parallel, you can achieve a 1-ohm final impedance, provided your amplifier is 1-ohm stable.
An amplifier capable of delivering 250W RMS at the specific impedance of your final wiring configuration is recommended.
The XT-6 is a raw driver and does not include a grille; we recommend installing a standard 6.5-inch speaker grille if the unit is exposed.
Kevlar is used because it is incredibly lightweight and rigid, which prevents the cone from flexing under pressure, leading to clearer, more precise bass.
The XT-6 is specifically engineered with a shallow mounting depth to accommodate installation in tight or confined vehicle locations.
Check your amplifier gain settings to ensure you are not clipping the signal, and verify that the subwoofer impedance matches your amplifier's capabilities.
Use a multimeter to check the continuity of the voice coils and verify all connections from the amplifier are secure.
Ensure all mounting screws are tightened to the vehicle frame and confirm that no loose wires are touching the speaker basket.
Installation requires a basic understanding of car audio wiring. Due to the dual voice coil (DVC) design, you can wire the coils in series for a 4-ohm load or in parallel for a 1-ohm load, depending on your amplifier's stability. Always ensure your amplifier is bridged or matched correctly to the chosen impedance. Care should be taken to secure the heavy gauge steel basket firmly to the mounting surface using all screw points to prevent rattles. Periodically check that the mounting hardware remains tight, as vehicle vibrations can loosen fasteners over time. Keep the speaker cone free of dust and moisture to maintain the integrity of the Kevlar material.
