Best current price£1.50from eBay
Shopping.co.uk recommended and popular offers
eBay£1.50Visit shop Etronix Deans Plug With Grips 1x MALE 1x FEMALE ET0789 Connector RC Pair Plugs
Visit shop5 offers from £1.50 - £6.39
View price history by clicking the chart icon.
The Etronix Deans Plug with Grips (ET0789) is designed for RC hobbyists seeking a secure and easy-to-handle power connection for their radio control models. By featuring integrated grips on both the male and female connectors, this set simplifies the process of connecting and disconnecting battery packs, though users should ensure their existing wire gauge is compatible with these standard T-style connectors to maintain optimal performance.
| Model Part Number | ET0789 |
|---|---|
| Brand | Etronix |
Yes, these are compatible with most RC batteries, provided the wires are soldered correctly and the connectors are rated for your specific current draw.
A soldering iron, solder, wire cutters, and heat-shrink tubing are required for proper and safe installation.
Yes, they are physically compatible with standard T-style/Deans connectors, though they will be slightly larger due to the integrated grip feature.
While generally rated for high-current RC use, always ensure your current draw is within the limits of the wire gauge and the connector specification.
No, heat-shrink tubing is not included with this set and should be purchased separately for insulation.
Apply a tiny amount of electrical contact cleaner or use a graphite lubricant, then cycle the connection several times to smooth the contact surfaces.
Check the soldered joints for cold solder joints and ensure the metal contact tabs are properly aligned and not pushed outward.
To install the Etronix Deans Plug, ensure you have a high-quality soldering iron and lead-based or lead-free electronics solder. Always tin the wire and the connector tabs separately before joining them. It is critical to slide heat-shrink tubing over the wires before soldering to ensure the connection is fully insulated after the solder cools. To maintain the connectors, keep them clean from track dust and moisture; if the metal contact tabs feel loose, they can be gently squeezed together with needle-nose pliers to restore a tight fit. Ensure you observe correct polarity (positive to positive, negative to negative) when soldering to avoid damaging your electronic speed controller or battery.
