Shimano Disc Brake Pads - L05A-RF Resin

The lifespan of brake pads depends on riding conditions and usage. Inspect the pads regularly and replace them when the braking surface is worn down to the wear indicator or to a minimum thickness.

These pads are designed for use with resin-compatible disc rotors. Always check the rotor compatibility before installation.

Perform several cycles of moderate braking from a moderate speed. Avoid hard braking during the break-in period to allow the pads and rotors to mate properly.

Clean the pads and rotors thoroughly with a disc brake cleaner. In severe cases, you may need to replace the pads.

Resin pads offer quieter operation and good initial bite, while metallic pads are more durable and perform better in wet conditions. Resin pads typically wear faster than metallic pads.

While they can be used for mountain biking, they are best suited for road and gravel riding. For more aggressive mountain biking, consider metallic brake pads.

You will need a hex wrench to remove and install the caliper bolts, and possibly a pad spreader to separate the pads for rotor insertion.

Check for air in the brake lines and bleed the brakes if necessary. Ensure the pads are not contaminated and that the rotors are clean.

Ensure the pads and rotors are clean. Consider lightly sanding the pads to remove any glazing. Check for proper alignment of the brake calipers.

Check brake caliper alignment. Inspect the rotor for damage and replace if necessary. Ensure the wheel is properly aligned in the frame.